USB Touch Panel Stopped Responding

Wim · 01-04-2014, 12:27 PM

From the logs it looks like the mini monitor is on the USB bus but when the software tries to talk to it, it gets an error. Looks like the monitor crashed.

This can happen if there are packet errors on the USB bus or there is a glitch in the power to the USB monitor causing a problem. The fix is to power cycle it to get it working again.

Wim

DTokarev · 01-06-2014, 11:16 PM

Thank you Wim!

I did replug the monitor and it started working as expected.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-04-2014, 12:27 PM	#1
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	From the logs it looks like the mini monitor is on the USB bus but when the software tries to talk to it, it gets an error. Looks like the monitor crashed. This can happen if there are packet errors on the USB bus or there is a glitch in the power to the USB monitor causing a problem. The fix is to power cycle it to get it working again. Wim

01-06-2014, 11:16 PM	#2
DTokarev Junior Member Join Date: Dec 2013 Posts: 2	Thank you Wim! I did replug the monitor and it started working as expected.