![]() |
|
|
|
|
#1 |
|
Junior Member
Join Date: Dec 2013
Posts: 7
|
Hey Guys,
Just tested the 7.5 device drivers on machines, I am still getting a BSOD. No idea whats causing this. was fine up until a few weeks ago. Causing a major issue with some of my work stations. Tim |
|
|
|
|
|
#2 |
|
Junior Member
Join Date: Dec 2013
Posts: 7
|
Hello. Just to recap I am still awaiting commentary. but here is a recap of my situation.
I use several display link software products in my industry (USB/VGA, USB/DVI, HP Portable Monitors u160). Upon installing them into a machine, the device will install software, activate properly, registers in Device Manager, and all other debugging steps listed on this forum. Immediately upon restarting the machine, windows will go through a boot cycle and then immediately BSOD when it calls up the dlkmd.sys driver. Referencing a string of memory addresses. Default, plug and play installed versions are crashing as are the new 7.5 versions of the software. At a loss, situation is getting critical. Tim |
|
|
|
|
|
#3 |
|
Junior Member
Join Date: Dec 2013
Posts: 7
|
Seriously, no response in what is rapidly approaching 72 hours
|
|
|
|
|
|
#4 |
|
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
I was out of the office last week hence the delay in responding. Can you enable advanced logging in the DisplayLink Support Tool (it's under the Advanced Options section) and attach the logs again now that the 7.5 software is installed? This will help us pinpoint the issue. As soon as I get that I'll raise a bug for this internally. Thanks, James |
|
|
|
|
|
#5 |
|
Junior Member
Join Date: Dec 2013
Posts: 7
|
Odd my first post didn't go through last night.
I was able to run the debugging software on two separate machines both exhibiting the same issue. File 1 - Dell machine no new drivers File 2 - HP Machine default software 7.2 File 3 - HP Machine 7.5 I managed to get the device to work on the 7.5 this time. It appears that i have a conflicting driver in my base image. i'd still be curious to know what the debugging tools indicate. thill |
|
|
|
|
|
#6 |
|
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
Can you let me know what you had to do to resolve the BSOD? Did this fix the issue on both machines? Thanks, James |
|
|
|
|
|
#7 |
|
Junior Member
Join Date: Dec 2013
Posts: 7
|
I had a conflicting driver from another device. An older VGA Device driver was installed on the firm image. when this driver is in place and the display link software is installed on the next restart everything falls apart.
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|