Win7/64 - The drivers for this device are not installed. (Code 28)

1200cubic · 06-26-2014, 08:46 PM

Partially,
Installed the latest DisplayLink driver, at first sight with no success, but then did the following:
1. go into device manager, selected the faulty device and choose update driver software.
2. search driver software on local pc
3. use select from driver list installed on ...
4. remove the check mark from show compatible hardware
5. find the usb display driver list
6. select from displaylink drivers the one, that matches the hex-code hardware id
7. installed that driver
After that, atleast the video worked as usual, audio didn't. But probably you'll have more luck. For me this issue is of no more interest, because I set up a completely new machine, which has a 4 channel graphic card. One channel over hdmi. Thus I don't need the extra external usb->hdmi device any more.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

06-26-2014, 08:46 PM	#9
1200cubic Junior Member Join Date: Apr 2014 Posts: 3	Partially, Installed the latest DisplayLink driver, at first sight with no success, but then did the following: 1. go into device manager, selected the faulty device and choose update driver software. 2. search driver software on local pc 3. use select from driver list installed on ... 4. remove the check mark from show compatible hardware 5. find the usb display driver list 6. select from displaylink drivers the one, that matches the hex-code hardware id 7. installed that driver After that, atleast the video worked as usual, audio didn't. But probably you'll have more luck. For me this issue is of no more interest, because I set up a completely new machine, which has a 4 channel graphic card. One channel over hdmi. Thus I don't need the extra external usb->hdmi device any more.