BYTECC DisplayLink and 1080p

powelld91 · 03-17-2015, 02:51 PM

Yes. The dock and monitor both have HDMI and DVI and both have been tried with separate cables, not just a DVI/HDMI adapter on the same cable.

So the hub works with a different monitor, and the monitor works plugged into the laptop HDMI...what a fail!

powelld91 · 03-17-2015, 04:06 PM

I messed with it a little more, and for some reason, the monitor will work through the hub on the D-SUB monitor port on a VGA cable and a VGA - DVI adaptor to the hub. But if I switch to DVI - DVI, no signal.

Is the hub only for analog signals at 1920x1080? It did DVI - DVI at 1650x1020.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-17-2015, 02:51 PM	#1
powelld91 Junior Member Join Date: Feb 2015 Posts: 5	Yes. The dock and monitor both have HDMI and DVI and both have been tried with separate cables, not just a DVI/HDMI adapter on the same cable. So the hub works with a different monitor, and the monitor works plugged into the laptop HDMI...what a fail!

03-17-2015, 04:06 PM	#2
powelld91 Junior Member Join Date: Feb 2015 Posts: 5	I messed with it a little more, and for some reason, the monitor will work through the hub on the D-SUB monitor port on a VGA cable and a VGA - DVI adaptor to the hub. But if I switch to DVI - DVI, no signal. Is the hub only for analog signals at 1920x1080? It did DVI - DVI at 1650x1020.