![]() |
|
|
|
|
#1 |
|
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
The logs are telling me about two Toshiba docks (the V10 and either a U3.0 or V3.0). There is a USB connection error when the V10 is connected. This could be caused by the USB cable, the V10 dock or the chipset in the R940. If possible please try swapping out the above items to help pin point the issue. Thanks, James |
|
|
|
|
|
#2 |
|
Junior Member
Join Date: Mar 2014
Posts: 12
|
Hi James,
Yes, I have both models but use them both at separate locations so swapping is not entirely practical. Is there anything in the log that shows the cause of the connection error? I've not noticed any problems when connecting through the U3.0. Is the connection cable for the V10 a standard USB type B cable? Thank you Last edited by pf01; 05-05-2015 at 06:52 PM. Reason: Edited for clarity |
|
|
|
|
|
#3 |
|
Junior Member
Join Date: Mar 2014
Posts: 12
|
Hello,
With the V10, I've tried a different cable, and used a different port (on the other side of the laptop). It's been OK until today but now just did the same lock up and 'restart'. Interestingly, it then froze for a couple of seconds but recovered. I don't think it was the laptop itself as I could move the mouse pointer to the laptop screen whilst it was still on the display connected to the dock. I have captured the logs again, is this the same problem as before? Do you think this suggests a fault with the dock? Thanks |
|
|
|
|
|
#4 |
|
Junior Member
Join Date: Mar 2014
Posts: 12
|
For other reasons I reinstalled Windows etc, and this seems to have fixed the issue.
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|