![]() |
![]() |
#1 |
Junior Member
Join Date: Jun 2015
Posts: 1
|
![]()
Hi,
I have a MacBook Pro (13-inch, Mid 2010) with the 2.4 GHz Intel Core Duo. I purchased the BVU195 to run a third monitor. Currently, I have an extra monitor plugged in through a VGA adapter to the display port. I downloaded the beta of the software and tried using the BVU195 to connect a third monitor using the VGA adapter. As soon as I plug in the BVU195 to the Mac, I get the following warning: USB Devices Disabled. Unplug the device using too much power to re-enable USB devices. I tried uninstalling the software, and then installing the regular software...no luck. When I plug in the USB and get the warning, the picture on the VGA connected monitor through the display port starts flickering as well. What am I doing wrong? Thanks in advance. -Ian |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Jul 2013
Posts: 6
|
![]()
probably the only thing you could do is to run this via a powered external USB hub.
|
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Jul 2015
Posts: 19
|
![]() |
![]() |
![]() |
![]() |
#4 |
Mac Team
Join Date: Feb 2009
Posts: 606
|
![]()
Yes this is all about power available. In this case the device exceeds the power available from the host. As mentioned by Ludacrispv and MAC you'll need a powered hub. Or a powered dock instead of the adapter.
Carlo |
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|