Surface Pro 3 Windows 10 Not working

JamesH · 08-28-2015, 01:43 PM

Hi,

Thanks for reaching out.

Could you run through these steps?
1. Follow the first section in this FAQ
2. If you still hit this issue please attach the output from this tool

Thanks,
James

matman · 08-28-2015, 05:47 PM

Thanks James,

I went through the steps, but still had the same end result. I did notice that the blue light was turning on and off on the device, which I hadn't noticed before. The blue light at the end is off and the device manager shows Unknown USB device (Port Reset Failed) under the USB Controllers.

Thanks,
Matt

JamesH · 09-02-2015, 04:40 PM

Hi,

Do you have a USB 2.0 hub you can connect the adapter to?

If so please install 7.9 M2, connect the hub to the Surface Pro and connect the adapter to the hub. After you have done this once you can revert to connecting the adapter directly to the Surface Pro dock.

Thanks,
James

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-28-2015, 01:43 PM	#1
JamesH Senior Member Join Date: Jan 2012 Posts: 1,523	Hi, Thanks for reaching out. Could you run through these steps? 1. Follow the first section in this FAQ 2. If you still hit this issue please attach the output from this tool Thanks, James

09-02-2015, 04:40 PM	#3
JamesH Senior Member Join Date: Jan 2012 Posts: 1,523	Hi, Do you have a USB 2.0 hub you can connect the adapter to? If so please install 7.9 M2, connect the hub to the Surface Pro and connect the adapter to the hub. After you have done this once you can revert to connecting the adapter directly to the Surface Pro dock. Thanks, James