Problem with DisplayLink Driver and Samsung Easy Settings Software

Harry Newton · 09-29-2012, 05:12 PM

I have the same problem. I am constantly getting the "igfxext Module has stopped working module." Here's my story. I have a ThinkPad X220 running Windows 7 using DisplayLink to drive three external monitors using ViBook devices. This setup works flawlessly. I bought a new ThinkPad X230 running Windows 7, installed DisplayLink and now I get this stupid message. I have done everything I know to do -- from re-imaging my hard drive to going down one version in DisplayLink. I've even replaced drivers from Lenovo with the newer ones on their web site. Nothing works. I don't know what igfxext.exe actually does. But I have determined (as least, so far) that if I just erase the error message when it appears, my machine seems to work perfectly. The irritation of the constant error message gets to me, however. Plus the nagging feeling that maybe one day the whole system will die. There's nothing on Intel's site about this problem. There's nothing on Lenovo's site and their people have heard nothing about. This link on the DisplayLink forum is basically the only thing I have found. If anyone has a solution or would like a dialog, my email address is HarryNewton2009@gmail.com. I'd be eternally grateful if someone had an idea.

madisonjames · 09-29-2012, 06:35 PM

I too have this issue with my Lenovo T530 with Intel/Nvidia Optimus. This PC worked fine until I installed the drivers for my Targus USB3.0 dock, which installs displaylink as part of the drivers.

The odd thing is I did not have this issue on my Lenovo T520 with Intel/Nvidia Optimus, and the main difference between these 2 models is USB2.0 verse USB3.0. Not sure if this means anything...

I was able to get ride of the igfxex.exe crash by renaming the file in c:\windows\system32. I have not seen any obvious ill affects in doing,,, yet...

I also have a second issue, the USB hub in the Targus USB3.0 dock will only work after the first reboot after the dock drivers are installed. Once I reboot again the usb hub will no longer work, and there are no bangs in the device manger too. I don't think this issue is related to renaming the igfxex.exe since this issue occurs before renaming that file.

http://www.targus.com/us/productdeta...RlZ29yeUlkPTEz

Both PC are running Windows 7 x64 Pro.

Harry Newton · 09-30-2012, 06:11 PM

REad my note above. I've spent hours fiddling with this idiocy.
But the solution suggested in the post above is simply to rename the file igfxext.exe to something like igfxext.dat. I did that this afternoon and the error message has disappeared. And my new X230 seems to be working fine. At least for now. A word: I reimaged my hard drive to factory install. Then I downloaded and installed the latest DisplayLink Windows driver....Then I renamed the file. More on this if something screws up. But for now, fingers crossed, I'm in good shape.

SlidVendetta · 10-18-2012, 04:21 PM

I have a Lenovo W520. I had the same errors whenever I reboot or change status like unplugging and plugging power back in. It was the DisplayLink drivers that had been updated. I use a ThinkVision LT1421 Travel Monitor and I had to revert to version 6.2 from April. All is working well now. Lenovo uses the same technology for the port replicators as well. Hope this helps somebody.

madisonjames · 11-11-2012, 12:34 PM

I have also found that this issue is tied to several of the other Lenovo components that are installed and their versions.

If you remove the Lenovo Power Manager tool software the issue seems to go away as well.

I had my Lenovo rep look into this issue too and he was able to correct it by loading specific driver/software version from both Lenovo and Displaylink, but he has not written up these items for me just yet.

Loboman · 02-11-2013, 10:50 PM

Every once in a while I get the following messages popping up:

"igfxext module has stopped working"

"Desktop Window Manager has stopped working and was closed"

Both times I just closed the offending window (x) and went about my work with what I believe to be no further difficulty. However, I'm not sure about this and the messages are concerning.

Is this still a problem Intel needs to address?

09-29-2012, 05:12 PM	#1
Harry Newton Junior Member Join Date: Jul 2010 Posts: 2	igfxext module has stopped working. I have the same problem. I am constantly getting the "igfxext Module has stopped working module." Here's my story. I have a ThinkPad X220 running Windows 7 using DisplayLink to drive three external monitors using ViBook devices. This setup works flawlessly. I bought a new ThinkPad X230 running Windows 7, installed DisplayLink and now I get this stupid message. I have done everything I know to do -- from re-imaging my hard drive to going down one version in DisplayLink. I've even replaced drivers from Lenovo with the newer ones on their web site. Nothing works. I don't know what igfxext.exe actually does. But I have determined (as least, so far) that if I just erase the error message when it appears, my machine seems to work perfectly. The irritation of the constant error message gets to me, however. Plus the nagging feeling that maybe one day the whole system will die. There's nothing on Intel's site about this problem. There's nothing on Lenovo's site and their people have heard nothing about. This link on the DisplayLink forum is basically the only thing I have found. If anyone has a solution or would like a dialog, my email address is HarryNewton2009@gmail.com. I'd be eternally grateful if someone had an idea.

09-29-2012, 06:35 PM	#2
madisonjames Junior Member Join Date: Sep 2012 Posts: 4	igfxext module has stopped working I too have this issue with my Lenovo T530 with Intel/Nvidia Optimus. This PC worked fine until I installed the drivers for my Targus USB3.0 dock, which installs displaylink as part of the drivers. The odd thing is I did not have this issue on my Lenovo T520 with Intel/Nvidia Optimus, and the main difference between these 2 models is USB2.0 verse USB3.0. Not sure if this means anything... I was able to get ride of the igfxex.exe crash by renaming the file in c:\windows\system32. I have not seen any obvious ill affects in doing,,, yet... I also have a second issue, the USB hub in the Targus USB3.0 dock will only work after the first reboot after the dock drivers are installed. Once I reboot again the usb hub will no longer work, and there are no bangs in the device manger too. I don't think this issue is related to renaming the igfxex.exe since this issue occurs before renaming that file. http://www.targus.com/us/productdeta...RlZ29yeUlkPTEz Both PC are running Windows 7 x64 Pro.

09-30-2012, 06:11 PM	#3
Harry Newton Junior Member Join Date: Jul 2010 Posts: 2	A solution to igfxext Module is not working REad my note above. I've spent hours fiddling with this idiocy. But the solution suggested in the post above is simply to rename the file igfxext.exe to something like igfxext.dat. I did that this afternoon and the error message has disappeared. And my new X230 seems to be working fine. At least for now. A word: I reimaged my hard drive to factory install. Then I downloaded and installed the latest DisplayLink Windows driver....Then I renamed the file. More on this if something screws up. But for now, fingers crossed, I'm in good shape.

10-18-2012, 04:21 PM	#4
SlidVendetta Junior Member Join Date: Oct 2012 Posts: 1	Possible Soloution I have a Lenovo W520. I had the same errors whenever I reboot or change status like unplugging and plugging power back in. It was the DisplayLink drivers that had been updated. I use a ThinkVision LT1421 Travel Monitor and I had to revert to version 6.2 from April. All is working well now. Lenovo uses the same technology for the port replicators as well. Hope this helps somebody.

11-11-2012, 12:34 PM	#5
madisonjames Junior Member Join Date: Sep 2012 Posts: 4	igfxext module has stopped working I have also found that this issue is tied to several of the other Lenovo components that are installed and their versions. If you remove the Lenovo Power Manager tool software the issue seems to go away as well. I had my Lenovo rep look into this issue too and he was able to correct it by loading specific driver/software version from both Lenovo and Displaylink, but he has not written up these items for me just yet.

02-11-2013, 10:50 PM	#6
Loboman Junior Member Join Date: Jan 2013 Posts: 4	igfxext module has stopped working Samsung series 9 Every once in a while I get the following messages popping up: "igfxext module has stopped working" "Desktop Window Manager has stopped working and was closed" Both times I just closed the offending window (x) and went about my work with what I believe to be no further difficulty. However, I'm not sure about this and the messages are concerning. Is this still a problem Intel needs to address?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode