Win10 - Primary and Secondary Monitors Switch Continuously

Orlanzo · 01-24-2016, 10:26 PM

Bump. Has anyone experienced a similar issue?

mtombolini@sirio-srl.com · 01-25-2016, 01:34 PM

I have the same problem after upgrading to Windows 10 64 bit.
Before, all works fine with Windows 7 64 bit. Same pc, same monitor and same docking (hp usb 2.0).
I remove completely software, reboot, install new updated software.
What else can i do?

AlbanRampon · 01-25-2016, 04:08 PM

Orlanzo, mtombolini,
have you tried Bob's recommendation?
It solved it for everyone else.

mtombolini@sirio-srl.com · 01-25-2016, 07:33 PM

i'm sorry...
i'm looking for, but i don't find it: where is posted the "bob's reccomandation"?
are you so kind to post the link, please?
Thank you.

AlbanRampon · 01-25-2016, 09:40 PM

Can you see Bob's posts now?
I think the short post + URL might have triggered a moderation hold.

mtombolini@sirio-srl.com · 01-28-2016, 11:56 AM

Solved with Bob's post workaround.
Thank you.

mgm67 · 02-01-2016, 08:11 PM

I see the registry hack posted in http://plugable.com/2016/01/19/flash...-7-9-m4-driver . I have not tried this yet. I would rather wait for updated driver. I reverted back to 7.9 M2 version.

I am particularly interested in M3 because this COO's computer has experienced the "Microsoft Office protected view is crashing when using hardware graphics acceleration" issue which should be fixed in M3.

sisyphus · 02-07-2016, 05:55 PM

I have a Toshiba Portege z20t upgraded to Windows 10 and connected to Toshiba Dynadock 4k. I also had the two screen flickering/switching problem that made them unusable and this seems to have stopped the z20t from recognising its keyboard dock. However, applying Bob's fix at http://plugable.com/2016/01/19/flash...-7-9-m4-driver has enabled me to get Dynadock 4k unit working again via micro-USB socket on z20t tablet.

I still do not know how to get tablet to recognise its keyboard dock again

Orlanzo · 01-25-2016, 07:45 PM

Quote:

Originally Posted by arampon

Orlanzo, mtombolini,
have you tried Bob's recommendation?
It solved it for everyone else.

Alban - Can you provide the URL? I'll definitely try it out, but can find it either.

Orlanzo · 01-25-2016, 08:05 PM

If you're using an HP laptop, try disabling/restarting the HP Support Solutions Framework Service. It seems to have worked for me.

01-25-2016, 01:34 PM	#2
mtombolini@sirio-srl.com Junior Member Join Date: Jan 2016 Posts: 3	i have the same problem I have the same problem after upgrading to Windows 10 64 bit. Before, all works fine with Windows 7 64 bit. Same pc, same monitor and same docking (hp usb 2.0). I remove completely software, reboot, install new updated software. What else can i do?

01-25-2016, 04:08 PM	#3
AlbanRampon Senior Member Join Date: Sep 2015 Posts: 1,685	Orlanzo, mtombolini, have you tried Bob's recommendation? It solved it for everyone else. __________________ Alban Rampon Senior product manager, universal docking stations and accessories Where to download the latest DisplayLink drivers How to clean up a corrupted installation How to report issues to DisplayLink for a speedy resolution

01-25-2016, 09:40 PM	#5
AlbanRampon Senior Member Join Date: Sep 2015 Posts: 1,685	Can you see Bob's posts now? I think the short post + URL might have triggered a moderation hold. __________________ Alban Rampon Senior product manager, universal docking stations and accessories Where to download the latest DisplayLink drivers How to clean up a corrupted installation How to report issues to DisplayLink for a speedy resolution

02-01-2016, 08:11 PM	#7
mgm67 Junior Member Join Date: Feb 2016 Posts: 1	Will this be fixed in a new driver release? I see the registry hack posted in http://plugable.com/2016/01/19/flash...-7-9-m4-driver . I have not tried this yet. I would rather wait for updated driver. I reverted back to 7.9 M2 version. I am particularly interested in M3 because this COO's computer has experienced the "Microsoft Office protected view is crashing when using hardware graphics acceleration" issue which should be fixed in M3.

02-07-2016, 05:55 PM	#8
sisyphus Junior Member Join Date: Feb 2016 Posts: 1	screens flickering W10 Dynadock fixed I have a Toshiba Portege z20t upgraded to Windows 10 and connected to Toshiba Dynadock 4k. I also had the two screen flickering/switching problem that made them unusable and this seems to have stopped the z20t from recognising its keyboard dock. However, applying Bob's fix at http://plugable.com/2016/01/19/flash...-7-9-m4-driver has enabled me to get Dynadock 4k unit working again via micro-USB socket on z20t tablet. I still do not know how to get tablet to recognise its keyboard dock again

01-24-2016, 10:26 PM	#1
Orlanzo Junior Member Join Date: Jan 2016 Posts: 7	Bump. Has anyone experienced a similar issue?

01-25-2016, 07:33 PM	#4
mtombolini@sirio-srl.com Junior Member Join Date: Jan 2016 Posts: 3	i'm sorry... i'm looking for, but i don't find it: where is posted the "bob's reccomandation"? are you so kind to post the link, please? Thank you.

01-28-2016, 11:56 AM	#6
mtombolini@sirio-srl.com Junior Member Join Date: Jan 2016 Posts: 3	Solved with Bob's post workaround. Thank you.

01-25-2016, 08:05 PM	#10
Orlanzo Junior Member Join Date: Jan 2016 Posts: 7	If you're using an HP laptop, try disabling/restarting the HP Support Solutions Framework Service. It seems to have worked for me.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode