Displaylink unreliable in windows 10, Intel 4970, ga-h81m-hd3 motherboard

[archos5005]

Have I missed something in protocol? What should I do to get a response? Thanks! Also, I can recreate the problem: when I run a game, it forces the "freeze" state--so maybe something to do with direct X?

[AlbanRampon]

Hello,
Forums, like with most, is not the priority way of getting tech support and this goes after support tickets.
Generally speaking, support is done by the device manufacturer, so in your case the first point of call should have been AOC who designed and built the product.
However we're still keen on helping where we can.

Thank you for including the logs with your description.
The USB Host Controller (PC side) is reporting issues with the AOC e1649Fwu device which is then disconnected from the bus by the host controller (USB XACT error)
1. Do you hear the Windows USB disconnection sound? I see Plug-and-Play event of the device removal.
2. Can you reproduce with only the AOC e2251Fwu connected?
3. Can you check the AOC e1649Fwu USB cable is properly secured at the back of the monitor?
4. Can you try an alternative cable in an alternative USB port to rule out a cable or mechanical tolerance issue?

I didn't mean to ignore you by PM, email notifications were not turned on. Your first message was on moderation hold because of the link.

Kind regards,
Alban

[archos5005]

Thank you so much for the reply! My apologies for my impatience.

Here is what you have asked for:
1. Only once did I hear the disconnect sound (only on the e1649Fwu device)--most the time it simply stops with no fanfare (if I'm not immediately using the screen, the biggest giveaway is that the desktop clock has stopped in the lower right corner).
2. Yes, the same problem occurs if it is only the e2251 connected.
3/4. the plug is secured and I have tried a different cable. The same problem occurs.

So alas... no difference. Randomly, the display will freeze or (more frequently now), I will run a game, and when I am returned to the desktop upon exiting, the monitor is still recognized and displays (the last thing that it was displaying before I launched the game) but is unresponsive. If I unplug the monitor and plug it back in, it still does not come back to life until a full restart.