DVI output to Win10 doesn't work with Kensington sd3000v chipset S011.0

AlbanRampon · 05-19-2016, 08:56 AM

Hi Eugene,

DisplayLink does not design or manufacture these. As your photos show, we're just one chip among a sea of them on the board. We wouldn't be able to know what changed between two revisions of the board and if I knew, it would not be appropriate for me to comment on their product.
Our chip is connected to the USB hub. If that hub doesn't work properly, this is normal that the outputs don't work properly.

Your best shot would be the docking station manufacturer. Only them would know what they changed, and what they tested.

Kind regards,
Alban

05-19-2016, 08:56 AM	#2
AlbanRampon Senior Member Join Date: Sep 2015 Posts: 1,685	Hi Eugene, DisplayLink does not design or manufacture these. As your photos show, we're just one chip among a sea of them on the board. We wouldn't be able to know what changed between two revisions of the board and if I knew, it would not be appropriate for me to comment on their product. Our chip is connected to the USB hub. If that hub doesn't work properly, this is normal that the outputs don't work properly. Your best shot would be the docking station manufacturer. Only them would know what they changed, and what they tested. Kind regards, Alban __________________ Alban Rampon Senior product manager, universal docking stations and accessories Where to download the latest DisplayLink drivers How to clean up a corrupted installation How to report issues to DisplayLink for a speedy resolution

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode