Display HP S410u possible workling with RaspberryPi

[Mahdi2016]

Hi Michal,

i'm back from vacation.

Here is the output from 'example' command of the terminal window is at follows:

(gdb) run
Starting program: /bin/example /home/pi/EDIDv1_1280x900 --enable-debug
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1".
Reading the EDID file /home/pi/EDIDv1_1280x900 failed.
[Inferior 1 (process 962) exited with code 01]

And the output from 'monitorsim' command of the terminal window is at follows:

Reading symbols from /bin/monitorsim...done.
(gdb) run
Starting program: /bin/monitorsim /home/pi/EDIDv1_1280x900 --enable-debug
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1".
Reading the EDID file /home/pi/EDIDv1_1280x900 failed.
[Inferior 1 (process 1018) exited with code 01]

I hope that helps.

Best regards
Michael