Gentoo: It's not working :(

[taiki]

I have the same problem

Linux mint 17.3 rosa
kernel 4.5.2



[ 6004.296071] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 6004.296137] evdi: [D] evdi_painter_crtc_state_notify:374 (dev=1) Notifying crtc state: 3
[ 6004.298068] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 6004.298079] evdi: [D] evdi_painter_get_edid_copy:192 (dev=1) 00 ff ff
[ 6004.299521] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 6004.299531] evdi: [D] evdi_painter_get_edid_copy:192 (dev=1) 00 ff ff
[ 6004.744124] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 6004.744134] evdi: [D] evdi_painter_get_edid_copy:192 (dev=1) 00 ff ff
...repeat
Pls help me.

Originally Posted by thomasmeier

After upgrading to the 1.2.65 drivers it does still not work, but dmesg looks a bit different now:

[ 231.847679] evdi: [D] evdi_painter_connect:448 (dev=-1) Connected with (null)
[ 231.847690] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 231.847739] evdi: [D] evdi_painter_crtc_state_notify:374 (dev=1) Notifying crtc state: 3
[ 231.849305] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 231.849309] evdi: [D] evdi_painter_get_edid_copy:192 (dev=1) 00 ff ff
[ 231.852768] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 231.852775] evdi: [D] evdi_painter_get_edid_copy:192 (dev=1) 00 ff ff
[ 236.006141] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 236.006149] evdi: [D] evdi_painter_get_edid_copy:192 (dev=1) 00 ff ff
[ 245.125530] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 245.125540] evdi: [D] evdi_painter_get_edid_copy:192 (dev=1) 00 ff ff
[ 249.059168] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 249.059175] evdi: [D] evdi_painter_get_edid_copy:192 (dev=1) 00 ff ff
[ 249.072617] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 249.072623] evdi: [D] evdi_painter_get_edid_copy:192 (dev=1) 00 ff ff
[ 365.476734] evdi: [D] evdi_detect:69 (dev=1) Painter is connected
[ 365.476741] evdi: [D] evdi_painter_get_edid_copy:192 (dev=1) 00 ff ff


So it says the Painter is connected now, which is probably a good thing?

Using the screen still fails:
$ xrandr --auto
xrandr: Configure crtc 3 failed