Cannot wake up computer using keyboard and mice attached to Displaylink Device

[malidlkan]

Thanks Alban.

Originally Posted by AlbanRampon

It depends on which sleep mode you want to wake up from.

I do not know the exact sleep mode state number (who except developers know that anyway?).
As 99% of all Windows users we have got the following options:
* standby
* hibernation
* shutdown

Of course it would be nice to wake up from all three states. However most people, like me, just want to wake up from the STANDBY mode, because this is the most used one.

At the moment the driver doesn't go into power save. This hasn't been a priority as people who are docked are usually also power connected and if not, Windows will terminate the driver anyway...

What means "doesn't go into power save"? So it should be no problem to wake up Windows 10 from standby mode?

Yes, you are right that most people are usually power connected (I'm too). Nevertheless my notebook goes into standby after some time and I'm for sure not the only one with such a configuration. IMHO power wake-up management is a critical needed feature, because if you use DisplayLink docks you use external input hardware and you want to wakeup your computer from it, instead of opening your notebook display and press a key.


By the way I have configured all input devices (mouse, keyboard, display link dock) to allow to wake up the computer (Driver Properties -> Power Management -> Allow this device to wake up the computer). I've also double-checked the power/energy options. But it doesn't work.

[AlbanRampon]

Hello,

I use the real formal names to avoid confusion or disappointments.

Hibernation and Shutdown are both total power-off states. The only difference is that your current state is saved to disk so you don't reboot from clean.
You won't wake-up from that as it's unlikely the computer cares about USB. This is currently moving and we will have the possibility to do this on USB-C, provided the platform manufacturer allows it.

I don't have Standby in the drop down. I have Sleep which might be Standby S0 or Fast Startup.

Which version of Windows are you using? and what kind of machine? S
Can you also run

powercfg /a

on a command prompt and tell me what your machine supports (listed at the top) so we can have a look?

Kind regards,
Alban

[malidlkan]

Yeah the problem is that I've got a Windows 10 in german language. So maybe standby = sleep.

Thnx, didn't know about that command:

> powercfg /a
Die folgenden Standbymodusfunktionen sind auf diesem System verfügbar:
    Standby (S3)
    Ruhezustand
    Hybrider Standbymodus
    Schnellstart

Die folgenden Standbymodusfunktionen sind auf diesem System nicht verfügbar:
    Standby (S1)
        Die Systemfirmware unterstützt diesen Standbystatus nicht.

    Standby (S2)
        Die Systemfirmware unterstützt diesen Standbystatus nicht.

    Standby (S0 Niedriger Energiestand – Leerlauf)
        Dieser Standbyzustand wird von der Systemfirmware nicht unterstützt.

[AlbanRampon]

Thanks,
What kind of machine is it?

I'm just realizing we've not been talking about the same thing. I let myself be influenced by the video part which has no relevance here. You were very clear, it's me!

What you're trying is not directly related to DisplayLink actually...
You have a keyboard and mouse connected to a USB hub within the i-tec docking station and so is the chip we sell them.
DisplayLink driver or chip have zero visibility of your keyboard and mouse USB traffic.

Do you know if the dock looks like it powers down when the computer goes to sleep? (you could attach a drive, or anything with a LED on it when working).
Is it the model of docking station you have?

Kind regards,
Alban

[malidlkan]

My setup:

ACER Aspire v3-371 notebook with Windows 10.0.15063

• i-tec USB 3.0 docking station
  • Monitor 1
  • Monitor 2
  • Mouse
  • Keyboard
  • Network
  • Audio

The i-tec USB 3.0 docking station has got a green and a blue led light. If Windows goes to sleep mode only the blue one lights.

[James C]

Hi malidlkan,

Can you confirm that when the mouse and keyboard are plugged directly into the laptop that they wake the laptop up from sleep?

Also, can you confirm that do they fail to wake it up immediately after the laptop sleeps or is it after a while? I have seen previous issues where some laptops sometimes fail to wake from sleep if hibernation is enabled can you please turn it off and let me know if this changed the behaviour.

To make hibernation unavailable, follow these steps:

1. Click Start, and then type cmd in the Start Search box.
2. In the search results list, right-click Command Prompt, and then click Run as Administrator.
3. When you are prompted by User Account Control, click Continue.
4. At the command prompt, type powercfg.exe /hibernate off, and then press Enter.
5. Type exit, and then press Enter to close the Command Prompt window.

To make hibernation available, follow these steps:

1. Click Start, and then type cmd in the Start Search box.
2. In the search results list, right-click Command Prompt, and then click Run as Administrator.
3. When you are prompted by User Account Control, click Continue.
4. At the command prompt, type powercfg.exe /hibernate on, and then press Enter.
5. Type exit, and then press Enter to close the Command Prompt window.

[qp6019352]

Some notebooks unfortunately don't seem to allow to wake through external USB input devices such as a mouse or keyboard when the lid is closed, even if all power saving settings are set up properly.

Are you trying it with the lid closed?

And have you already tried it with the lid open?