![]() |
|
|
|
|
#1 |
|
Senior Member
Join Date: Feb 2009
Posts: 1,561
|
Hi
You want to use Option 2 and add the entry MacAddressOverride under HKEY_LOCAL_MACHINE\System\CurrentControlSet\servic es\dlcdcncm\Parameters\ I've just tested this on the latest Ethernet driver and it works fine. I used the MAC address you were testing with (EC21E5660A20). Note that this only gets read by the Ethernet driver when the driver starts, so you will need to unplug and replug the dock to get it to use the registry MAC address after you've set it. Wim |
|
|
|
|
|
#2 |
|
Junior Member
Join Date: Sep 2017
Posts: 6
|
Hi Wim,
Thanks for testing but unfortunately it still does not work for us. We've even tried switching USB ports on laptops and power cycling the dock but no joy. Attaching snippet of our latest test. Is there anything related to hardware /reg key that we might be missing ? Thanks , Waqqas |
|
|
|
|
|
#3 | |
|
Senior Member
Join Date: Feb 2009
Posts: 1,561
|
I've exported the registry and pasted the .reg file contents below. The characters in the MAC address are all 0-F? A zero is not actually a capital "O"?
Quote:
Wim |
|
|
|
|
|
|
#4 |
|
Junior Member
Join Date: Sep 2017
Posts: 6
|
Hi,
Yes, the mac is all 0-F hex characters and we're checking by by ipconfig and getmac both. |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|