The 10.13: High Sierra Thread

[Carlo]

Originally Posted by Russ

I've just installed the 4.0 driver and did not need to perform any unblocking - no prompts, no message to allow or anything.

I've found that if i have 1 external display connected, everything works fine. The moment I attach a second external display, the system tries to go into Mirrored mode and given that it is not currently working, everything fails. Is there a workaround for this?

For a workaround, try this FAQ: http://support.displaylink.com/knowl...-mirror-issues

For the bug itself, it would be very helpful if you could raise a defect with Apple.

Cheers,
Carlo

[ckg1999]

I am unable to use the displayLink (even though it is detected) in HighSierra.

I have a 13" MBP retina core i7, with 2 external displays. When I plug in the DisplayLink, I get a "No Signal" message on the display. The display shows the additional screen as an option in "Displays" and the System Report shows:

Product ID: 0x4301
Vendor ID: 0x17e9 (DisplayLink (UK) Ltd.)
Version: 32.97

[Carlo]

Originally Posted by ckg1999

I am unable to use the displayLink (even though it is detected) in HighSierra.

I have a 13" MBP retina core i7, with 2 external displays. When I plug in the DisplayLink, I get a "No Signal" message on the display. The display shows the additional screen as an option in "Displays" and the System Report shows:

Product ID: 0x4301
Vendor ID: 0x17e9 (DisplayLink (UK) Ltd.)
Version: 32.97

I'd play with different resolutions in System Preferences->Displays to ensure a valid resolution is selected.
If this fails, please send us the logs: http://support.displaylink.com/knowl...rticles/755301

Kind regards,
Carlo