Displaylink ceases to work in 10.13.4

[aehsmu]

Followed the instructions with anticipation.

You should mention that WiFi needs to be enabled or the AirPlay option doesn't appear.

I see a number of AppleTVs listed (on a college campus), but not the DisplayLink option.

So close!

Thanks for moving this forward.
--
Eric H.
--

[Khashoggi]

Originally Posted by aehsmu

Followed the instructions with anticipation.

You should mention that WiFi needs to be enabled or the AirPlay option doesn't appear.

I see a number of AppleTVs listed (on a college campus), but not the DisplayLink option.

So close!

Thanks for moving this forward.
--
Eric H.
--

Same problem. Even uninstalled beta1, then installed beta3 no airplay option and no DisplayLinkUserAgent listed under security-accesibilty-privacy settings for auto start.

[Amarriner]

I downloaded the new driver however I am still getting clone mode only.

[Gastronaught]

I followed the instructions to enable the airplay display, got it to work extending to the displayLink airplay display. I then unplugged it and now cannot get airplay to reactivate when it is reconnected. I have tried rebooting, unplugging, replugging, modifying settings etc. all to no avail.

This is the article I followed to enable the DisplayLink Airplay functionality:
https://support.displaylink.com/know...ticles/1854724

However I only ever see DisplayLinkStop now even when Airplay has not been activated and never just DisplayLink:



I have poked around in settings, carried out many reboots and tried changing when the DisplayLink device is connected nothing works.

[Gastronaught]

To fix the below I connected to a different wireless network. the corporate WiFi has 802.1x authentication and I think this breaks airplay for display link - Oddly I have no issues Using reflector 3 to airplay to my mac over the same network.

Originally Posted by Gastronaught

I followed the instructions to enable the airplay display, got it to work extending to the displayLink airplay display. I then unplugged it and now cannot get airplay to reactivate when it is reconnected. I have tried rebooting, unplugging, replugging, modifying settings etc. all to no avail.

This is the article I followed to enable the DisplayLink Airplay functionality:
https://support.displaylink.com/know...ticles/1854724

However I only ever see DisplayLinkStop now even when Airplay has not been activated and never just DisplayLink:



I have poked around in settings, carried out many reboots and tried changing when the DisplayLink device is connected nothing works.

[aehsmu]

The "how to" instructions for 10.13.4 beta 3 DOES work for 10.13.5.

Thanks!

At least I'm back to semi-normal.

Fascinating work-around.
--
Eric H.
--

[russjr08]

This new workaround works, thanks!

[Gastronaught]

I have this working after toggling my firewall off then back on again.

[Wozzy]

Originally Posted by Amarriner

I downloaded the new driver however I am still getting clone mode only.

Did you follow the guide

https://support.displaylink.com/know...ticles/1854724


What use to be plug and play is now jump through hoops, not very user friendly. 1080p looks hideous on my 25" screen. Its progress DL but you have a way to go yet to get this fixed.

[Amarriner]

Originally Posted by Wozzy

Did you follow the guide

https://support.displaylink.com/know...ticles/1854724


What use to be plug and play is now jump through hoops, not very user friendly. 1080p looks hideous on my 25" screen. Its progress DL but you have a way to go yet to get this fixed.

Thanks you,

I did follow the instructions, Airplay doens't show in the menu bar, so went through "system preferences" connected to the Displaylink.
-Shows three monitors available for a few seconds, I can then only access the main one
then disconnects itself and I go back to clone.

Any suggestions?