Blank Monitor: MacOS 10.14 Mojave w/ Driver 5.0

TheSnails · 09-25-2018, 01:47 PM

I needed to reinstall the driver twice, before things work fine.

You may want to do the following:
1. Uninstall displaylink driver completely; no other past versions are installed. Use the uninstaller of the latest driver.
2. Restart.
3. After restart, osx should not detect your monitor. Open system preferences, go to security and privacy, unlock the lock icon at the bottom left. Leave this window open.
4. Make sure that the allow apps downloaded in the security and privacy window does not show anything preventing displaylink. If there is any, then allow it.
5. Install the displaylink driver.
6. Leave your monitor plugged in.
7. Restart.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-25-2018, 01:47 PM	#3
TheSnails Junior Member Join Date: Oct 2013 Posts: 5	I needed to reinstall the driver twice, before things work fine. You may want to do the following: 1. Uninstall displaylink driver completely; no other past versions are installed. Use the uninstaller of the latest driver. 2. Restart. 3. After restart, osx should not detect your monitor. Open system preferences, go to security and privacy, unlock the lock icon at the bottom left. Leave this window open. 4. Make sure that the allow apps downloaded in the security and privacy window does not show anything preventing displaylink. If there is any, then allow it. 5. Install the displaylink driver. 6. Leave your monitor plugged in. 7. Restart.