DisplayLink USB Graphics Software 5.0.1 for macOS - Mojave 10.14 NOT WORKING

[Martila4166]

I received my docking last night and installed it. I'm using OS X 10.14.3, after attempting multiple times because my monitor was being powered, but there was not signal coming through I finally got it to work. It's very important and what worked for me was to allow the displaylink to run. Make sure that once the drivers (5.0.1) are installed after the reboot, that you go to sys preferenes>security & privacy and allow the application to run. This was the only thing that worked for me.

Hope this helps someone.

LM

[jasonmcartor]

Originally Posted by Martila4166

I received my docking last night and installed it. I'm using OS X 10.14.3, after attempting multiple times because my monitor was being powered, but there was not signal coming through I finally got it to work. It's very important and what worked for me was to allow the displaylink to run. Make sure that once the drivers (5.0.1) are installed after the reboot, that you go to sys preferenes>security & privacy and allow the application to run. This was the only thing that worked for me.

Hope this helps someone.

LM

I'm running Mojave 10.14.3 – upgraded to a new machine and now can't get DisplayLink to work –*black monitors. I've used DL for a long time and it worked fine before my upgrade. You're running 10.14.3? I've checked the "Allow Application to Run" in System Prefs, but still no luck. Thanks.

[s354378]

I have had success with 10.14.3 and 5.0.1 on a Macbook Pro 15" 2018 and HP Elite USB-C Dock. With 10.14.1 there were only black screens and mouse cursors.

[Skywalker]

Originally Posted by s354378

I have had success with 10.14.3 and 5.0.1 on a Macbook Pro 15" 2018 and HP Elite USB-C Dock. With 10.14.1 there were only black screens and mouse cursors.

I'm on 10.14.4 with driver 5.0.1 on a Macbook Air 2018 and this combination is not working.