Dell D6000 - Displaylink, Displayport to VGA stuck at 640x480

Bossworld · 02-25-2019, 01:52 PM

Hi Alban

Thanks for the reply and confirming the issue lies with identification

I am using a pair of adaptors, plugged into the D6000 display port ports, and into standard VGA cables then into the HP monitors. I will endeavour to photograph them tomorrow and see if there is any identification for passive/active on there.

Thanks

Joe

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

02-25-2019, 01:52 PM	#4
Bossworld Junior Member Join Date: Jan 2019 Posts: 4	Hi Alban Thanks for the reply and confirming the issue lies with identification I am using a pair of adaptors, plugged into the D6000 display port ports, and into standard VGA cables then into the HP monitors. I will endeavour to photograph them tomorrow and see if there is any identification for passive/active on there. Thanks Joe