|
|
|||||||
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
03-06-2019, 02:57 PM
|
#1 |
|
Junior Member
Join Date: Mar 2019
Posts: 1
|
Seems to broken in 10.14.4 beta 4
I updated to Driver 5.1 with Mac OS 10.14.4 this week and it appears to be broken again! Displays are both blank but show up in the Display selection on the Mac.
|
|
|
|
03-08-2019, 03:43 PM
|
#2 |
|
Junior Member
Join Date: Mar 2019
Posts: 2
|
same here
Same issue with MacOS 10.14.4 Beta (18E205e) and DisplayLink 5.1 driver installed. The driver is properly loaded. The display is NOT detected in Displays settings at all.
DisplayLinkDriver: Version: 5.1 (32) Last Modified: 2019-03-04, 6:01 PM Bundle ID: com.displaylink.driver.DisplayLinkDriver Loaded: Yes Get Info String: DisplayLink Driver 5.1.32 - Copyright © 2003 - 2019 DisplayLink (UK) Ltd. All rights reserved. Obtained from: Identified Developer Kind: Intel Architectures: x86_64 64-Bit (Intel): Yes Location: /Library/Extensions/DisplayLinkDriver.kext Kext Version: 5.1 (32) Load Address: 18446743521824600000 Loadable: Yes Dependencies: Satisfied Signed by: Developer ID Application: DisplayLink Corp (73YQY62QM3), Developer ID Certification Authority, Apple Root CA Last edited by pmarsteau; 03-08-2019 at 03:47 PM. |
|
|
|
|
03-08-2019, 04:02 PM
|
#3 |
|
Junior Member
Join Date: Mar 2019
Posts: 2
|
Found out the root cause: my USB port connected to DisplayLink VGA adapter wasn't detected at all. I changed the USB port to another USB hub and it started working again. So not an issue with the driver after all.
|
|
|
|
|
03-12-2019, 10:42 AM
|
#4 |
|
Junior Member
Join Date: Feb 2019
Posts: 4
|
With 10.14.4 beta 4 and now 5 and Displaylink 5.1 everything is working fine here.
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
