D6000 Display Issue - 640x480 low res

Harters · 03-11-2020, 01:25 PM

Hi

Thanks for getting back to me...

Sorry for the confusion.

The setup that was working was 2 HDMI (monitor end) to HDMI-D (DP Port end) cables
Now this has stopped working

I can now only achieve 1 working monitor with good resolution by switching over to either

Monitor to laptop or Monitor to D6000 HDMI port

In both cases of course I have to use a normal HDMI-HDMI cable instead of the HDMI to HDMI-D in the DP ports which i used to use without issue.

So from your reply it seems i need somehow to get the EDID file onto both DP ports?

Hope that clarifies things

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-11-2020, 01:25 PM	#3
Harters Junior Member Join Date: Mar 2020 Posts: 5	Hi Thanks for getting back to me... Sorry for the confusion. The setup that was working was 2 HDMI (monitor end) to HDMI-D (DP Port end) cables Now this has stopped working I can now only achieve 1 working monitor with good resolution by switching over to either Monitor to laptop or Monitor to D6000 HDMI port In both cases of course I have to use a normal HDMI-HDMI cable instead of the HDMI to HDMI-D in the DP ports which i used to use without issue. So from your reply it seems i need somehow to get the EDID file onto both DP ports? Hope that clarifies things