BigSur 11.5.2 broke DisplayLink

BillyJack · 09-22-2021, 02:24 AM

The last post said to change the plugs from one to the other.

it worked!!! it has been down for 4 days. Came back from a trip where I was using my monitor on my laptop came back and plugged it in with what I thought was the correct cable. I had one in the HDMI on port set 1 and one in the HDMI in port set two. swapped to a display port and no change. Them I moved the cable from one to two and two to one and damn if it just started working.

THANK YOU!!!

Stepax · 10-12-2021, 04:51 PM

M1 MacBook / BigSur 11.5.2 / DisplayLink 1.5.0

Switched the docking station from one USB port on MacBook to the other and back several times until both monitores got detected again.

This might happen again every time you disconnect the docking station

09-22-2021, 02:24 AM	#1
BillyJack Junior Member Join Date: Sep 2021 Posts: 1	Mirror Display not able to make it stop Till NOW! The last post said to change the plugs from one to the other. it worked!!! it has been down for 4 days. Came back from a trip where I was using my monitor on my laptop came back and plugged it in with what I thought was the correct cable. I had one in the HDMI on port set 1 and one in the HDMI in port set two. swapped to a display port and no change. Them I moved the cable from one to two and two to one and damn if it just started working. THANK YOU!!!

10-12-2021, 04:51 PM	#2
Stepax Junior Member Join Date: Oct 2021 Posts: 1	monitors finally detected M1 MacBook / BigSur 11.5.2 / DisplayLink 1.5.0 Switched the docking station from one USB port on MacBook to the other and back several times until both monitores got detected again. This might happen again every time you disconnect the docking station Last edited by Stepax; 10-12-2021 at 04:54 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode