Dell D6000 new firmware for dock not waking up on USB-C when rebooting

[Fuuzy_Dunlop]

Reposting my comment from another thread - I have a M1 Air M1, Dell D6000 and am running the 1.6 Beta and upgrading to 12.1 fixed the two issues I was having:

• My Displaylink connected monitor is now consistently re-enabling when I wake the PC from sleep (running 1 USB-C to Displaylink monitor + Displaylink monitor from D6000). Prevsiouly it almost never worked without reconnecting the USB connection to the dock
• Ethernet on my D6000 wouldn't work after waking from sleep and that seems to be fixed as well.

[cristobalhdez]

Hi all,
I would like to know if someone knows how to validate the dock's firmware version from Mac.
I have a Macbook M1 and the only issue that I have so far is that I need to unplug the dock on reboot, once the desktop is fully loaded I can plug the dock again.
I don't have a Windows laptop/pc right now, but I could borrow one from work if I need.
Just looking to see if that firmware update will fix the issue on reboots.
Thanks

[HE911]

Originally Posted by cristobalhdez

Hi all,
I would like to know if someone knows how to validate the dock's firmware version from Mac.
I have a Macbook M1 and the only issue that I have so far is that I need to unplug the dock on reboot, once the desktop is fully loaded I can plug the dock again.
I don't have a Windows laptop/pc right now, but I could borrow one from work if I need.
Just looking to see if that firmware update will fix the issue on reboots.
Thanks

If you go to About This Mac > System Report...> USB> Dell Universal Dock D6000 and look at version. It seems to display for me Version: 31.59

[cristobalhdez]

Originally Posted by HE911

If you go to About This Mac > System Report...> USB> Dell Universal Dock D6000 and look at version. It seems to display for me Version: 31.59

Thank you so much.
My current version is: 30.00

[lollo2054]

hello! i just tried to update the d6000 fw but it stopped at the beggining. Tried via usb-c on parallels (it stopped just after the fw began to update) and on another win device via usb-a (device not seen by the laptop)

anyone with the same issue?

setup: macbook pro m1, dell d6000, samsung qn90b 4k

[Jerin2017]

Hello
i am trying to connect my mac book pro using the dell docking station WD19TBS WITH MY three dell monitor but for some reason is only showing as mirror display is coming up but its just mirror there is no option to extended my three monitors can someone help me to fix this issue

[rboerner]

Originally Posted by Jerin2017

Hello
i am trying to connect my mac book pro using the dell docking station WD19TBS WITH MY three dell monitor but for some reason is only showing as mirror display is coming up but its just mirror there is no option to extended my three monitors can someone help me to fix this issue

The docking station you are using does not have DisplayLink technology inside of it, which means that DisplayLink will not be able to assist you.

The dock is a Thunderbolt docking station that has a DisplayPort Multi-Stream (DP MST) hub inside of it.

Mac's do not support DP MST, which is way your displays are being mirrored. This is no workaround for this behavior.

[toddtmw]

Originally Posted by HE911

If you go to About This Mac > System Report...> USB> Dell Universal Dock D6000 and look at version. It seems to display for me Version: 31.59

Can someone confirm if 31.59 is the latest as of right now that allows all ports to be used?

Thanks!