M1 MacBook Pro - Ventura version 13.0.1 - DisplayLink stopped working

[dhcmega]

hi! everything was ok with Monterey. Waited for ventura 13.1 to have a revised version. Just after installing, Displaylink adapter was not longer recognized as and usb device. not good.

[subpop]

Same here, Macbook Pro M1, Belking Displaylink adapter, does not work after update.

[davss]

All good on MacBook Air M1 2020 M1 with 3 x Dell 2515H via Startech USB32DPPRO DL adapters and drivers all connectect via integrated USB hub in Dell U4919DW then everything via single USB-C cable to the Mac that's also charing it (so all 4 monitors' video + charging is going via single USB-C cable from the 49" monitor).

The only issues I have is intermittent loss of windows arrangment and usually wallpaper on one of the monitors gets reset to default red-ish photo upon wake up from sleep.
My Mac also started to freeze and reboot itself from time to time with a quick flash of pink screen but can't pin down the cause of this problem - kernel panic etc. Still investigating although can't work long hours without my DP monitors to rule out DL.

[luminoso]

Monitors aren't getting recognized by my M1 MacBook Pro - Was working fine for a few months, until Ventura 13.0.1.

[DaveyJake]

Same here. My third external monitor is no longer recognized but was working previously.

[Jbruntzel]

So I just got a brand new Mac Book Pro M1. One of the first things I did was update iOS to Ventura. (Dumb thing to do I guess?). Then purchased Plugable's 14-1 Dock Station and nothing works at all.

So stupid.........

I have 2 HDMI 27 inch monitors I'm trying to extend. 2 "musical" keyboard controllers via 3.0 USB, and a Focusrite Audio interface Scarlett 18i20 for 2 digital audio workstations. Propellerhead Reason and Logic Pro.

Sounds like we are dead in the water until DisplayLink gets their act together.

I can plug 1 monitor HDMI direct to the Mac book and it instantly works. However I next 2 monitors thus the docking station.

All this feels like IT problems from back in the day circa 2002-ish.....

[Jbruntzel]

Wrong solutions for me..... I'm out DisplayLinks. Nothing personal. I've learned I need a solutions is that more audio centric.

[sparcus]

Hi Guys,

I upgraded to Mac OSX 13.2.1 Ventura last night, and my plugable UD-3900PDZ dock stopped working with one of the two external monitors.

I had to unplug HDMI 1 monitor, and plug HDMI monitor 2 into the number 1 port first, then plug the original HDMI1 monitor into port 2 in this sequence to work. I don't know why but this is how I managed to get it working. If I tried this new setup without this sequence it would only work with one monitor.

Hopefully, this helps someone that has issues displaying both external monitors.