![]() |
|
|
|
|
#1 |
|
Junior Member
Join Date: May 2023
Posts: 1
|
I also am experiencing the same issue the only one HDMI port on my dock properly works after update 13.3.1. Currently on 13.4. m1 mba
|
|
|
|
|
|
#2 |
|
Junior Member
Join Date: May 2023
Posts: 7
|
Same problem. D6000, M1 Pro. After updating to 13.3.1 and further to 13.4, an external monitor connected via hdmi stopped working. Version 1.8.1, firmware A04
Clean OS, first install displaylink (laptop just issued by employer) upd: only one monitor (hdmi) connected, no other devices or monitors are connected to the docking station Last edited by shidoh; 05-26-2023 at 05:15 AM. |
|
|
|
|
|
#3 |
|
Junior Member
Join Date: May 2023
Posts: 1
|
I was having a similar issue, and in the System Setting > Displays, I saw that both of my monitors were being detected, but only one was working. It turns out that when I updated my computer, it reset the Refresh rates to 75hz, but my docking station only supports 60hz via USB. So changing my second monitor to 60hz fixed the issue immediately.
|
|
|
|
|
|
#4 |
|
Junior Member
Join Date: May 2023
Posts: 1
|
I just bought the doc, am running Ventura 13.4 and all newly installed software, and it only recognizes a single display from my MacBook Air M2. Very frustrating.
|
|
|
|
![]() |
| Tags |
| 13.3.1, 2nd display not working, macbook update |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|