EDID for DP not re-done after unplug

[Szymon]

Hi Paganim,

Are you able to share more information about the DP connected monitor? Brand and exact model.
If in your 3-monitor setup you have different monitors, are you also able to modify your configuration so your DP connected monitor is connected via HDMI and one of HDMI monitors is connected via DP?

Regards,
Szymon

[Paganim]

Originally Posted by Szymon

Hi Paganim,

Are you able to share more information about the DP connected monitor? Brand and exact model.
If in your 3-monitor setup you have different monitors, are you also able to modify your configuration so your DP connected monitor is connected via HDMI and one of HDMI monitors is connected via DP?

Regards,
Szymon

Hi !

I will try to give you the model of my 3 monitors and what I have done.

- First one plugged in DP (screen 1): https://www.amazon.fr/dp/B098TGMJRN?...sin_title&th=1, ASUS ROG XG27UQR

- Second one plugged in HDMI (screen 2): https://www.aorus.com/fr-fr/monitors.../Specification, Aorus fi27q-p

- Third one (screen 3): PLG2788H in HDMI

Following your advice here's what I have done:
I was running on windows and I unplugged the DisplayPort cable from screen 1 and then plug it in my screen 3 (while taking care to remove hdmi plug from this one of course). I then only had two monitors plugged, screen 2 and screen 3 which now was in DP port. I decided to turn on my hub station and then the screen 3 in DP worked correctly BUT the screen 2 in HDMI was not working anymore.

I'm cluessless of what's happening here. Is there anything I can do to help you identify the issue ?

Regards !