I fixed it !!

jumpinjack090 · 02-07-2026, 01:55 PM

If you're using DisplayLink for MacOS try to follow these steps that worked for me (2/6/2026):

1. Quit & ReOpen - Go to Screen Recording and try to "Quit and ReOpen" your DisplayLink Access.
2. FileVault - Make sure your "FileVault" encryption is turned off
3. Reboot - Restart your laptop

After rebooting your laptop, DisplayLink should recognize your monitors again.

I hope this helps!

Szymon · 02-09-2026, 07:03 AM

Thank you, for sharing your experience.

Just to note: FileVault can be enabled, but in such case DisplayLink screens won't work on your login screen at boot.

Regards,
Szymon

02-07-2026, 01:55 PM	#1
jumpinjack090 Junior Member Join Date: Feb 2026 Posts: 2	I fixed it !! If you're using DisplayLink for MacOS try to follow these steps that worked for me (2/6/2026): 1. Quit & ReOpen - Go to Screen Recording and try to "Quit and ReOpen" your DisplayLink Access. 2. FileVault - Make sure your "FileVault" encryption is turned off 3. Reboot - Restart your laptop After rebooting your laptop, DisplayLink should recognize your monitors again. I hope this helps!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-09-2026, 07:03 AM	#2
Szymon DisplayLink Tech Support Join Date: Feb 2010 Posts: 220	Thank you, for sharing your experience. Just to note: FileVault can be enabled, but in such case DisplayLink screens won't work on your login screen at boot. Regards, Szymon