Anker Prime / macOS Sleep/Wake Issues

Szymon · 04-23-2026, 01:42 PM

Hi,

Despite multiple attempts we were unable to reproduce this symptom. We've testing using the same setup as in the description.

I assume you are on the latest macOS 26 and DisplayLink Manager 16.0?

Regards,
Szymon

thaoula · 05-08-2026, 03:03 AM

Defintel'y having this issue.

1. It takes a long time to make the attached monitor primary when connect a MacBook Pro with the lid closed.

2. After using the monitor for a while, if you go away and comeback after laptop sleeps. Triggering the laptop to wake by keyboard / mouse will many times result in the screen waking up in a some very low resolution that cannot be resolved without taking out the cable and connecting it again.

Szymon · 05-11-2026, 07:11 AM

Hi thaoula,

I believe the issue you are facing is more related to the handling your monitor while resuming from suspend. What is your monitor brand and exact model? Is it connected via HDMI or DisplayPort? If it is DisplayPort, are you able to test it via HDMI and vice versa?

Regards,
Szymon

thaoula · 05-13-2026, 08:29 AM

Hi Szymon,

Thanks for the reply.

It is an LG 49G95T and it connected via DisplayPort .. I will try HDMI.

When it was connected to my Mac directly via HDMI i never had an issue.

Regards,
Tarek

05-08-2026, 03:03 AM	#2
thaoula Junior Member Join Date: May 2026 Posts: 2	Defintel'y having this issue. 1. It takes a long time to make the attached monitor primary when connect a MacBook Pro with the lid closed. 2. After using the monitor for a while, if you go away and comeback after laptop sleeps. Triggering the laptop to wake by keyboard / mouse will many times result in the screen waking up in a some very low resolution that cannot be resolved without taking out the cable and connecting it again. Last edited by thaoula; 05-08-2026 at 03:09 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-23-2026, 01:42 PM	#1
Szymon DisplayLink Tech Support Join Date: Feb 2010 Posts: 344	Hi, Despite multiple attempts we were unable to reproduce this symptom. We've testing using the same setup as in the description. I assume you are on the latest macOS 26 and DisplayLink Manager 16.0? Regards, Szymon

05-11-2026, 07:11 AM	#3
Szymon DisplayLink Tech Support Join Date: Feb 2010 Posts: 344	Hi thaoula, I believe the issue you are facing is more related to the handling your monitor while resuming from suspend. What is your monitor brand and exact model? Is it connected via HDMI or DisplayPort? If it is DisplayPort, are you able to test it via HDMI and vice versa? Regards, Szymon

05-13-2026, 08:29 AM	#4
thaoula Junior Member Join Date: May 2026 Posts: 2	Hi Szymon, Thanks for the reply. It is an LG 49G95T and it connected via DisplayPort .. I will try HDMI. When it was connected to my Mac directly via HDMI i never had an issue. Regards, Tarek