10-22-2015, 07:17 PM | #1 |
Junior Member
Join Date: Oct 2015
Posts: 3
|
Fresco drivers - removed but not able to install
Hi,
I did have a (rubbish) Fresco VGA adapter installed, however, I've done everything to remove the drivers as posted on various forums. Until I've done this, my new Dell device won't install Attached is a diagnostic performed earlier. Please advise what's going on! Thanks |
10-23-2015, 01:04 PM | #2 |
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
Please check out this FAQ: http://support.displaylink.com/knowl...aphics-softwar If you're still having issues after following the steps mentioned let me know. Thanks, James |
10-23-2015, 04:57 PM | #3 | |
Junior Member
Join Date: Oct 2015
Posts: 3
|
Quote:
Yes - I've been through all of that and didn't get anywhere. The drivers are not installed, there is no service installed. I've been through and removed anything in the registry to do with Fresco. I've searched the hard drive for anything Fresco. Still - there is something that is stopping the installation, hence I've run the diagnostic as others have done and attached the files to the original post. any help appreciated - I really would prefer not to reinstall Windows 10! Thanks |
|
10-23-2015, 05:49 PM | #4 | |
Junior Member
Join Date: Oct 2015
Posts: 3
|
Quote:
I reinstalled the Fresco drivers, and then uninstalled - problem solved The actual drivers were for the Thin2000 device - I downloaded the latest version from the FrescoLogic website and hey presto - all done. |
|
12-09-2015, 06:54 AM | #5 |
Junior Member
Join Date: Dec 2015
Posts: 1
|
No trace of the Fresco drivers but still can't install Displaylink
DisplayLink install STILL won't install. Diagnostic attached. Relevant system info: Sony Vaio with two USB 3.0 ports, Win10, 20Gb free space, 8Gb RAM, Windows Defender. PLEASE help. |
12-10-2015, 08:14 AM | #6 |
Senior Member
Join Date: Sep 2015
Location: Cambridge, UK
Posts: 1,678
|
Scarlin,
You have the Fresco service: FLxHCIv. If bypassing our check was enough to make the software run, we would not do any check. You can check the registry and should find HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servic es\FLxHCIv You need to stop and delete it. Open a command prompt as administrator. Being an admin does NOT automatically open an elevated command prompt, you must specify it. Then run the following two commands sc stop FLxHCIv sc delete FLxHCIv Alternatively, you can try reinstall and then remove Fresco to see if they uninstall their software properly that time. Regards, Alban How to uninstall Fresco Logic USB Graphics software
__________________
Alban Rampon Senior product manager, universal docking stations and accessories "DisplayLink is proud to be a Synaptics brand." Where to download the latest DisplayLink drivers How to clean up a corrupted installation How to report issues to DisplayLink for a speedy resolution |
Thread Tools | Search this Thread |
Display Modes | |
|
|