Anker Prime / macOS Sleep/Wake Issues

dickenam · 04-08-2026, 04:06 PM

Hi All,

I have an Anker Prime dock running the Display Link software pushing to 2 external monitors (Viewsonic UX3211 via straight HDMI and Dell U2722D via straight Display Port). The host is a MBP 14" with M4 Pro with Apple Magic KB and Trackpad peripherals. I run this setup with the clamshell closed.

Once the machine goes to sleep, I cannot get the monitors to wake reliably without opening the lid or reseating the cables (I do not have a problem waking the machine when the lid is open, apparently). This setup works flawlessly once I get it up and running again.

I have tried all sorts of OS power settings changes (thanks Google Gemini!) to no avail. Is it the BT peripherals? Is it shoddy HDMI cable? A setting I am missing? Pls halp.

Szymon · 04-23-2026, 01:42 PM

Hi,

Despite multiple attempts we were unable to reproduce this symptom. We've testing using the same setup as in the description.

I assume you are on the latest macOS 26 and DisplayLink Manager 16.0?

Regards,
Szymon

04-08-2026, 04:06 PM	#1
dickenam Junior Member Join Date: Apr 2026 Posts: 1	Anker Prime / macOS Sleep/Wake Issues Hi All, I have an Anker Prime dock running the Display Link software pushing to 2 external monitors (Viewsonic UX3211 via straight HDMI and Dell U2722D via straight Display Port). The host is a MBP 14" with M4 Pro with Apple Magic KB and Trackpad peripherals. I run this setup with the clamshell closed. Once the machine goes to sleep, I cannot get the monitors to wake reliably without opening the lid or reseating the cables (I do not have a problem waking the machine when the lid is open, apparently). This setup works flawlessly once I get it up and running again. I have tried all sorts of OS power settings changes (thanks Google Gemini!) to no avail. Is it the BT peripherals? Is it shoddy HDMI cable? A setting I am missing? Pls halp. Last edited by dickenam; 04-09-2026 at 12:14 PM. Reason: Fixed it -- Trackpad wakes it properly, keyboard does not.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-23-2026, 01:42 PM	#2
Szymon DisplayLink Tech Support Join Date: Feb 2010 Posts: 299	Hi, Despite multiple attempts we were unable to reproduce this symptom. We've testing using the same setup as in the description. I assume you are on the latest macOS 26 and DisplayLink Manager 16.0? Regards, Szymon