05-04-2011, 01:23 PM | #1 |
Junior Member
Join Date: May 2011
Posts: 1
|
Ipad Displaylink / Flash
Hi,
I'm using Displaylink with Ipad2. When I run it, after 10 min using, my main screen and the ipad screen begin to flash about every 5 secondes as if a display detection was done. Did you know this issue ? Regard, Lestat |
05-04-2011, 05:54 PM | #2 |
Junior Member
Join Date: May 2011
Posts: 1
|
IE blinking after installing iPad app
I have a similar case, just installed on iPad 2 and Windows 7 and the Internet Explorer pages start blinking even when I turn the iPad app off. Any advice?
Thanks, |
05-05-2011, 07:39 AM | #3 |
Junior Member
Join Date: May 2011
Posts: 1
|
Same problem here !
|
05-09-2011, 10:06 AM | #4 |
Junior Member
Join Date: May 2011
Posts: 2
|
Crashes after a while
Hello, Just got this awesome program earlier but encountered a problem. I'm using my ipad as an extension to the screen.
The connections work fine for a period of time after which my screens will start acting funny(windows/tabs on ipad go back to my laptop desktop and both screens start blinking). This problem is resolved by pressing the home to on my ipad to leave the app and going back in again. However, the windows then remain on my laptop screen leaving me to drag my windows over from scratch. Anyone facing the same problem? |
05-09-2011, 10:13 AM | #5 |
Junior Member
Join Date: May 2011
Posts: 2
|
That's exactly the same problem as what I'm having now too.
|
05-11-2011, 02:52 PM | #6 |
Junior Member
Join Date: Mar 2011
Posts: 5
|
same on first gen ipad
though it normally takes about half hour.
|
05-12-2011, 01:17 PM | #7 |
Junior Member
Join Date: May 2011
Posts: 5
|
Yes, I'm seeing the same behavior. The Latitude 6410 I'm using it with has a NVIDIA NVS 3100 in it.
|
05-12-2011, 02:27 PM | #8 |
Junior Member
Join Date: May 2011
Posts: 5
|
Yes, I'm seeing the same behavior. It doesn't seem to matter what program(s) are on the iPad screen. Normally it seems to take 15-30 minutes for the behavior to start. FWIW, I have a Latitude E6410 with a NVIDIA NVS 3100.
|
05-16-2011, 12:36 PM | #9 |
Senior Member
Join Date: Feb 2009
Posts: 1,561
|
When this occurs, could you grab the log files as described here:
http://kb.displaylink.com/269 This should tell us what the software is doing in this state. Thanks Wim |
05-18-2011, 04:37 PM | #10 |
Junior Member
Join Date: May 2011
Posts: 5
|
A quick note that update 1.1.1 seems to have improved the situation for me. Not fixed it by any means, but I am able to go an hour or more before the issue manifests itself now.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|