12-11-2017, 03:09 PM | #71 |
Member
Join Date: Jun 2013
Posts: 50
|
Turn off mirroring
Try turning off mirroring, extending the desktop to all displays, and making sure "Displays have separate spaces" is enabled (under "Mission Control" settings in System Preferences).
|
02-19-2018, 10:04 AM | #72 |
Junior Member
Join Date: Feb 2018
Posts: 1
|
Dynadoc 3.0 stopped working with High Sierra
I finally upgraded to High Sierra a few days ago and the Dynadock stopped working. No worries I downloaded the drivers and installed them and back up and working perfectly no issues.
Fast forward to today and suddenly my 2 external HP displays were both solid green. I then restarted my Macbook Air 2013 and now the screens won't even light up. Sound etc is still running through the dock. I have tired unplugging it all and restarting several times. I have uninstalled the software and reinstalled it twice, still the screens don't even power up, they simply are in the dormant "nothing connected" mode. I have run the Displaylink diagnostic tool and have the results available. Help!!! Last edited by MojoRein; 02-19-2018 at 10:13 AM. |
02-20-2018, 05:52 AM | #73 | |
Mac Team
Join Date: Feb 2009
Posts: 606
|
Quote:
Carlo |
|
03-04-2018, 01:24 PM | #74 |
Junior Member
Join Date: Feb 2018
Posts: 3
|
Any update on this? I am tired of staring at 2 monitors that i cannot use. I am searching for my box to ship my dock back and avoid anything to do with display link software in the future.
|
03-10-2018, 06:44 PM | #75 |
Junior Member
Join Date: Mar 2018
Posts: 1
|
Me too
Me too with the display being detected, black, and only seeing the mouse pointer.
MacOS Version 10.13.3 MacBook Pro Retina 13-inch Early 2015 Displaylink Driver Version 4.1.11 Displaylink Device StarTech USB32VGAES What You Are Experiencing: Detected, working, but only for mouse pointer What is Expected: Showing windows etc I use 4 displays. Internal Retina, 1 HDMI, 1 TB, and the displaylink. All worked fine under Sierra (except for some artifacts in Outlook 2016 on the DL display). I have a colleague with a very similar setup (same HW, same OS build, also startech). His works perfectly. This may help diagnose I've tried:
Trying next:
Last edited by rafikibob; 03-11-2018 at 09:25 AM. Reason: Added useful info |
03-12-2018, 07:40 PM | #76 |
Junior Member
Join Date: Mar 2018
Posts: 1
|
MacOS Version: 10.13.3 (17D102)
Computer Make and Build Year: MacBook Pro (13", 2017, 4 Thunderbolt, 3 Ports) Displaylink Driver Version: 4.1 Displaylink Device: Asus MB169B+ What You Are Experiencing: Cannot get display driver to work What is Expected: To get it to load and work Just received the Asus monitor today. I have followed the instructions to a "T". The first time I tried to install, I got the prompt to go to Security & Privacy to allow the extension. I didn't even press the "Allow" button when the driver finished, and reported that the Installation was successful. I have uninstalled then reinstalled many times, and allowing at least 20 mins in between to allow the timer to reset. The proper reboots have been done at every step. I believe that the issue is that the extension wasn't properly installed (not allowed properly) but I cannot get prompted again to allow it. I really need for this monitor to work - any help is appreciated! Update 03/16/18: Please disregard this post. I returned the Asus monitor, and have replaced it with a plug and play which works beautifully. Your "support" (and I use the term loosely) is non-existent and will avoid any product supported by DisplayLink going forward. Last edited by electricladee; 03-16-2018 at 05:36 PM. Reason: Add useful info: I also checked in "System Report" in USB, but have never seen the DisplayLink driver listed |
03-21-2018, 11:44 AM | #77 |
Junior Member
Join Date: Jan 2018
Posts: 2
|
What are you using now?
What plug and play are you using? I'm in the same situation. Purchased a brand new ASUS that will not work.
|
03-22-2018, 03:15 PM | #78 |
Junior Member
Join Date: Mar 2018
Posts: 2
|
DisplayLink driver not working
We have issue with HP USB-C UNIVERSAL DOCK, display link driver do not work at all, so do not get any video on screens on MacOS 10.13.3 or 10.13.14 betas.
Tested on multiple machines Is there any solution for this issue? |
03-22-2018, 07:17 PM | #79 | |
Member
Join Date: Oct 2017
Posts: 36
|
Quote:
The alternative would be the previous model: HP Elite USB-C G2 (X7W54AA). I'm currently using it on 10.13.3. |
|
03-23-2018, 07:30 AM | #80 | |
Junior Member
Join Date: Mar 2018
Posts: 2
|
Quote:
But it like a charm on on MacOS Sierra 10.12.6.. |
|
|
|