Go Back   DisplayLink Forum > Alpha, Beta Software Testing Programs > Closed Alpha and Beta Programs

 
 
Thread Tools Search this Thread Display Modes
Old 04-30-2010, 07:18 AM   #1
Phil Meads
Junior Member
 
Join Date: Sep 2009
Location: Oakland, CA
Posts: 13
Default You are not monitoring "Windows Server 2008 R2 support "

I keep asking when you are going to remove that very nasty block on allowing your updated drivers to run on Windows Server 2008.

I originally bought one ASUS VW223B last June and, once I downloaded the Vista 64 driver, it worked fine. So I bought two more monitors to be run under Diamond BVU160 adapters and a mount for all four. This completely bombed. I tried the same on my Windows 7 laptop which worked fine with one added monitor but bombed with more than one.

Later on, I downloaded a new version on the Windows 7 machine, and it worked reasonably well, but I was prevented from trying the newer drivers on my Windows Server 2008 machine. I've posted, I've written letters, even to your legal department (who never answered).

This attitude of yours is extremely nasty. I use this computer as a workstation and initially wanted it to run on the 64 bit version of Windows xp, which was not allowed by Dell, so I am stuck -- all because of you!!!

I just tried 5.3.24566 -- same block

Phil Meads, Ph.D.
retired accelerator physicist
Phil Meads is offline  
Old 06-27-2010, 12:01 AM   #2
satch
Junior Member
 
Join Date: Jun 2010
Posts: 2
Default Have you tried compatibility mode for installer?

Hi,

I really hate when installers behave badly. However, it's usually just a version check done during installation and driver would work ok. You can sometimes bypass that mess running installer in compatibility mode. Check this superb guide at technet site about it: http://blogs.technet.com/b/chrad/arc...lity-mode.aspx

Hope it helps!!
satch is offline  
Old 07-12-2010, 10:15 PM   #3
SHaase
Junior Member
 
Join Date: Jul 2010
Posts: 1
Default 2008 R2 compat issues

As the original poster said, installation is blocked on 2008 R2. The 1st thing I did was to try running it in compatibility mode but it did not help. The 2nd thing I did was register on the forum to get the 5.4b1 beta driver but it has the same issue as well.

Is 2008 R2 specifically blocked for a reason? I'd be happy to test it out if you removed that restriction in the beta driver.
SHaase is offline  
Old 07-25-2010, 05:34 AM   #4
simden
Junior Member
 
Join Date: Jul 2010
Posts: 1
Default

A closed thread in "5.2 Software Release" suggested that there was a legal reason for blocking Windows 2008. But after numerous and insisting requests by users no other explanations where given.

This is a major issue to me and for many users I'm sure.

This silence from DisplayLink is not a good sign in regards to their customers support pratices.

We would really appreciate some response on this matter.
simden is offline  
Old 07-26-2010, 09:24 AM   #5
thinkriver
Junior Member
 
Join Date: Jul 2010
Posts: 1
Default

Make the driver support Server 2008 R2!
thinkriver is offline  
Old 09-01-2010, 01:59 PM   #6
seagull
Junior Member
 
Join Date: Aug 2010
Location: Belgium
Posts: 1
Default

I was able to install the 5.5 driver on Windows Server R2 Enterprise (driver version 5.5.27257.0, driver date: 21/08/2010).
The adapter shows up in device manager as HP USB Graphics Adap, but the icon is not shown in the tray (this icon is not currently active), and the monitor does not get any signal.
seagull is offline  
Old 11-09-2010, 04:55 PM   #7
Marc Jelen
Junior Member
 
Join Date: Nov 2010
Posts: 3
Smile Good news !!!

see what i got from Wim (thx for this answer):

Dear Marc Jelen,

Thank you for your e-mail. Currently we have to disable install on Windows
Server versions, due to a commercial agreement. This is why we have to enforce
a block on installing on server.

The good news is that this restriction will expire and we will have a version of software that will
install and run on Windows server versions next year.

I'm afraid until then, we cannot release a server version of our
software.

Best regards,

Wim
DisplayLink Technical Support

Last edited by Wim; 11-24-2010 at 12:38 PM.
Marc Jelen is offline  
Old 12-22-2010, 06:00 AM   #8
Phil Meads
Junior Member
 
Join Date: Sep 2009
Location: Oakland, CA
Posts: 13
Default When in 2011?????

When in the next year will a server version be available? January 1st I hope. I've been waiting for many months.
Phil Meads is offline  
Old 01-01-2011, 05:56 PM   #9
Wim
Senior Member
 
Join Date: Feb 2009
Posts: 1,561
Default

Hi All

I'm pleased to announce that the commercial agreement we had in place that prevented us enabling install on Windows server editions expired today. A v5.6 beta software release has been made, removing the Windows server block and is now available in this forum.

I realise that it has been a frustrating year for those of you who wanted to use DisplayLink software on server editions, and we'd like to thank you for your patience until we could remove the block.

Thanks

Wim
Wim is offline  
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:40 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.