![]() |
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Jun 2016
Posts: 1
|
![]()
The install fails at the point it tries to run ./displaylink-installer.sh install in the directory /tmp/selfgz4895
Following is the output from the script Code:
$ sudo ./displaylink-driver-1.3.54.run [sudo] password for <username redacted for privacy>: Verifying archive integrity... All good. Uncompressing DisplayLink Linux Driver 1.3.54 100% ./displaylink-driver-1.3.54.run: 1: eval: ./displaylink-installer.sh: Permission denied $ Here is the output of the script in debug mode $ sudo sh -x displaylink-driver-1.3.54.run[sudo] password for <username redacted for privacy>: + umask 077 + CRCsum=181221745 + MD5=ad1d1cefcd6a35c7433d01dbb63d0601 + TMPROOT=/tmp + label=DisplayLink Linux Driver 1.3.54 + script=./displaylink-installer.sh + scriptargs=install + licensetxt= + targetdir=displaylink-driver-1.3.54 + filesizes=13084701 + keep=n + quiet=n + print_cmd_arg= + type printf + print_cmd=printf + unset CDPATH + finish=true + xterm_loop= + noprogress=n + nox11=n + copy=none + ownership=y + verbose=n + initargs= + true + break + test n = y -a n = y + MS_PrintLicense + test x != x + test n = n + tty -s + : + test displaylink-driver-1.3.54 = . + test n = y + tmpdir=/tmp/selfgz4895 + dashp= + mkdir /tmp/selfgz4895 + pwd + location=/home/<username redacted for privacy>/Downloads/DisplayLink USB Graphics Software for Ubuntu 1.3.54 + test x != x1 + MS_Check displaylink-driver-1.3.54.run + OLD_PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin:/bin:/usr/bin:/sbin:/usr/local/ssl/bin:/usr/local/bin:/opt/openssl/bin + MD5_ARG= + exec + MD5_PATH=/usr/bin/md5sum + test -x /usr/bin/md5sum + test -x /usr/bin/md5sum + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin + test n = n + MS_Printf Verifying archive integrity... + printf Verifying archive integrity... Verifying archive integrity...+ tr -d + wc -c + head -n 499 displaylink-driver-1.3.54.run + offset=12072 + verb= + i=1 + echo 181221745 + cut -d -f1 + crc=181221745 + test -x /usr/bin/md5sum + basename /usr/bin/md5sum + test md5sum = digest + cut -d -f1 + echo ad1d1cefcd6a35c7433d01dbb63d0601 + md5=ad1d1cefcd6a35c7433d01dbb63d0601 + test ad1d1cefcd6a35c7433d01dbb63d0601 = 00000000000000000000000000000000 + MS_dd displaylink-driver-1.3.54.run 12072 13084701 + eval /usr/bin/md5sum + /usr/bin/md5sum + cut -b-32 + expr 13084701 / 1024 + blocks=12778 + expr 13084701 % 1024 + bytes=29 + dd if=displaylink-driver-1.3.54.run ibs=12072 skip=1 obs=1024 conv=sync + md5sum=ad1d1cefcd6a35c7433d01dbb63d0601 + test ad1d1cefcd6a35c7433d01dbb63d0601 != ad1d1cefcd6a35c7433d01dbb63d0601 + test x = xy + crc=0000000000 + verb=n + test 0000000000 = 0000000000 + test xn = xy + expr 1 + 1 + i=2 + expr 12072 + 13084701 + offset=13096773 + test n = n + echo All good. All good. + head -n 499 displaylink-driver-1.3.54.run + tr -d + wc -c + offset=12072 + test xn = xy + test n = n + MS_Printf Uncompressing DisplayLink Linux Driver 1.3.54 + printf Uncompressing DisplayLink Linux Driver 1.3.54 Uncompressing DisplayLink Linux Driver 1.3.54+ res=3 + test n = n + trap echo Signal caught, cleaning up >&2; cd $TMPROOT; /bin/rm -rf $tmpdir; eval $finish; exit 15 1 2 3 15 + MS_diskspace /tmp/selfgz4895 + test -d /usr/xpg4/bin + df -kP /tmp/selfgz4895 + tail -1 + awk { if ($4 ~ /%/) {print $3} else {print $4} } + leftspace=4012312 + test -n 4012312 + test 4012312 -lt 31452 + MS_dd_Progress displaylink-driver-1.3.54.run 12072 13084701 + test n = y + + cdfile=displaylink-driver-1.3.54.run + offset=12072 + length=13084701 + /tmp/selfgz4895 eval gzip -cd + gzip -cd + UnTAR x + + pos=0 + bsize=4194304 + test 4194304 -gt 13084701 test n+ expr 13084701 / 4194304 = n + tar xvf - + blocks=3 + expr 13084701 % 4194304 + bytes=501789 + dd bs=12072 count=0 skip=1 + expr 0 + 4194304 + pos=4194304 + MS_Printf 0%% + printf 0%% 0% + test 3 -gt 0 + test 4194304 -le 13084701 + dd bs=4194304 count=1 + expr 13084701 / 100 + pcent=130847 + expr 4194304 / 130847 + pcent=32 + test 32 -lt 100 + MS_Printf \b\b\b\b\b\b\b + printf \b\b\b\b\b\b\b + test 32 -lt 10 + MS_Printf 32%% + printf 32%% 32% + expr 4194304 + 4194304 + pos=8388608 + test 8388608 -le 13084701 + dd bs=4194304 count=1 + expr 13084701 / 100 + pcent=130847 + expr 8388608 / 130847 + pcent=64 + test 64 -lt 100 + MS_Printf \b\b\b\b\b\b\b + printf \b\b\b\b\b\b\b + test 64 -lt 10 + MS_Printf 64%% + printf 64%% 64% + expr 8388608 + 4194304 + pos=12582912 + test 12582912 -le 13084701 + dd bs=4194304 count=1 + expr 13084701 / 100 + pcent=130847 + expr 12582912 / 130847 + pcent=96 + test 96 -lt 100 + MS_Printf \b\b\b\b\b\b\b + printf \b\b\b\b\b\b\b + test 96 -lt 10 + MS_Printf 96%% + printf 96%% 96% + expr 12582912 + 4194304 + pos=16777216 + test 16777216 -le 13084701 + test 501789 -gt 0 + dd bs=501789 count=1 + MS_Printf \b\b\b\b\b\b\b + printf \b\b\b\b\b\b\b + MS_Printf 100%% + printf 100%% 100% + test xy = xy + PATH=/usr/xpg4/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin + cd /tmp/selfgz4895 + id -u + chown -R 0 . + id -g + chgrp -R 0 . + expr 12072 + 13084701 + offset=13096773 + test n = n + echo + cd /tmp/selfgz4895 + res=0 + test x./displaylink-installer.sh != x + test xn = xy + eval ./displaylink-installer.sh install + ./displaylink-installer.sh install displaylink-driver-1.3.54.run: 1: eval: ./displaylink-installer.sh: Permission denied + res=126 + test 126 -ne 0 + test xn = xy + test n = n + cd /tmp + /bin/rm -rf /tmp/selfgz4895 + eval true + true + exit 126 $ |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Feb 2010
Posts: 386
|
![]()
The installer script is a bash script and its shebang is #!/bin/bash.
Is it possible you either don't have bash installed or don't have privileges to use it? You can extract the .run file with Code:
--keep --noexec Then, you can modify the installer script as you like. Cheers, Michal |
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|