Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Mac Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 02-02-2016, 07:00 PM   #1
David_Mac_User
Junior Member
 
Join Date: Feb 2016
Posts: 2
Default "Manufacturing Test Mode" After 2.5 driver update

I've been using a Sabrent USB-3DV since June 2014 with my macbook pro and recently upgraded the OS from 10.9 to 10.11. After upgrading the OS, I downloaded and installed the 2.5 Driver from displaylink to get 10.11 support. After rebooting the mac failed to recognize the USB display.
Digging into System Information, the adapter now shows as
Code:
Manufacturing Test Mode:

  Product ID:	0xc300
  Vendor ID:	0x17e9  (DisplayLink (UK) Ltd.)
  Version:	0.01
  Serial Number:	00000000-000000
  Speed:	Up to 480 Mb/sec
  Manufacturer:	DisplayLink
  Location ID:	0x14100000 / 9
  Current Available (mA):	1000
  Current Required (mA):	2
  Extra Operating Current (mA):	0
I'm not sure how to recover the device. Looks like the firmware update bricked it...

Any suggestions?
David_Mac_User is offline   Reply With Quote
Old 02-03-2016, 08:57 AM   #2
Carlo
Mac Team
 
Join Date: Feb 2009
Posts: 606
Default

Hi,

The device enumerates but it is stuck in recovery mode.

Before trying anything can you please follow the instructions in http://support.displaylink.com/knowl...to-displaylink and send us the debug information?
It would be really useful to us.

Have you already tried installing a different version of the drivers? It's possible that the FW upgrade process would unstuck with an intermediate step. You could install 2.4 for example, connect the device and if everything is fine try 2.5 again.
Please make sure to use the 2.5 final version (2.5 (68993)).

Kind regards,
Carlo
Carlo is offline   Reply With Quote
Old 02-12-2016, 07:55 PM   #3
David_Mac_User
Junior Member
 
Join Date: Feb 2016
Posts: 2
Default

I tried downgrading to 2.4 before upgrading to 2.5. It didn't seem to have an effect.

I've attached logs from 2.4 and 2.5 that hopefully will help out.
David_Mac_User is offline   Reply With Quote
Old 02-16-2016, 09:06 AM   #4
Carlo
Mac Team
 
Join Date: Feb 2009
Posts: 606
Default

Quote:
Originally Posted by David_Mac_User View Post
I tried downgrading to 2.4 before upgrading to 2.5. It didn't seem to have an effect.

I've attached logs from 2.4 and 2.5 that hopefully will help out.
Thank you,

It looks tricky, something we haven't seen before. Needs more investigation. Will be back as soon as I have news.

Best regards,
Carlo
Carlo is offline   Reply With Quote
Old 03-02-2016, 02:15 PM   #5
Carlo
Mac Team
 
Join Date: Feb 2009
Posts: 606
Default

Hi David,

We could not find a way to explain this kind of issue without damaged hardware being part of the problem.

Can you please open a ticket at http://support.displaylink.com mentioning this forum post? My colleagues will follow up from there.

Kind regards,
Carlo
Carlo is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.