Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Mac Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 10-24-2018, 08:17 PM   #1
jipidou
Junior Member
 
Join Date: Oct 2018
Posts: 3
Default Mojave and 5.0.1 drivers

Hi, we have 2015/2016 and 2017 macbook pro models and since 10.13.4, even with 10.14, we cannot have more than one monitor working if the docking have port that doest work with displaylink. If all port use display link, then no monitor will works....
We tried several versions of displaylink but it's all the same for us, the monitor will flicker but nothing show on it, not even the cursor...
So I did a few search and went across this steps and it's working!
So if will disabled she SIP protection, allow display link (need to be installed) and then you enable SIP back.

-From the Apple menu select Restart.
-As your Mac restarts, press and hold down the Command(⌘) + R keys immediately upon hearing the startup chime. Hold the keys until the Apple logo appears to get the computer in Recovery mode.
-The computer is now in Recovery mode. From the Apple menu select Utilities -> Terminal
-Run the command: csrutil disable
-From the Apple menu, select Restart.
-After the macOS is loaded, open terminal and type: sudo kextcache -invalidate /
-- In theory this should work too : sudo kextcache -invalidate /Library/StagedExtensions/Library/Extensions/DisplayLinkDriver.kext
-From the Apple menu, select Restart.
-As your Mac restarts, press and hold down the Command(⌘) + R keys immediately upon hearing the startup chime. Hold the keys until the Apple logo appears to get the computer in Recovery mode.
-The computer is now in Recovery mode. From the Apple menu select Utilities -> Terminal
-Run the command: csrutil enable
-From the Apple menu, select Restart.

And now everything will work!
jipidou is offline   Reply With Quote
Old 10-29-2018, 11:28 AM   #2
MacMiniUser
Junior Member
 
Join Date: Oct 2018
Posts: 1
Default

This should be in the user instructions !!!

Great work, only thing that made it work for me.
MacMiniUser is offline   Reply With Quote
Old 11-01-2018, 12:44 AM   #3
icedub
Junior Member
 
Join Date: Nov 2018
Posts: 1
Default

Thank you so much! This worked for me on my 2015 mac mini running 10.14. I was about to give up hope.

Have you updated to 10.14.1 yet?
icedub is offline   Reply With Quote
Old 11-02-2018, 12:16 PM   #4
jipidou
Junior Member
 
Join Date: Oct 2018
Posts: 3
Default

not yet...
I'll try it at the beginning of next week and let you know if it's still working.

EDIT : Ok I did it and it's still working without doing anything

Last edited by jipidou; 11-02-2018 at 05:57 PM.
jipidou is offline   Reply With Quote
Old 11-05-2018, 05:15 AM   #5
pjkirby
Junior Member
 
Join Date: Nov 2018
Posts: 1
Default Thanks

I registered just to say that this solution worked for me as well. I'm currently using a 2016 Macbook Pro with Mojave 10.14. I followed the instructions given from this post and it worked like a charm. Thanks!
pjkirby is offline   Reply With Quote
Old 12-07-2018, 09:20 PM   #6
matthewd
Junior Member
 
Join Date: Dec 2018
Posts: 1
Default Thank you!

This solution worked for me too! Almost gave up on getting a dual monitor setup to work with my Macbook Air 2017 and with Mojave 10.14.1

Also registered just to comment. Thanks!
matthewd is offline   Reply With Quote
Old 12-12-2018, 02:18 PM   #7
alexdmoney
Junior Member
 
Join Date: Dec 2018
Posts: 5
Default 2017 MBP 15": Updated from 10.13.3 to 10.14.2, confirmed working w/o DL Driver update

https://displaylink.org/forum/showpo...9&postcount=14
alexdmoney is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.