Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Mac Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 07-23-2018, 03:32 PM   #1
Gudd
Junior Member
 
Join Date: Jul 2018
Posts: 10
Default 10.13.6, 1 x Air Display + USB HDMI?

I really need to go above 10.13.3. I have an eGPU at home and a DisplayLink setup at work. The eGPU is pretty painful on 10.13.3 although it does work OK.

I was just wondering if I used the beta fudged drivers that use Air Display for 1 external screen, if I were to add a second screen via a USB->HDMI adapter that I have plugged in to one of the USB3 ports of the DisplayLink, would this give me my second external screen? I don't want to have to downgrade again so would prefer not to just try it!

If required I suppose I could use a USB-C to USB-A on the MBP and then the HDMI adapter. That's really messy but if it would work then it's a cheaper option than a TB3 dock.

Any ideas?
Gudd is offline   Reply With Quote
Old 07-24-2018, 07:23 PM   #2
Gudd
Junior Member
 
Join Date: Jul 2018
Posts: 10
Default

Just to answer my own question, I think I've found a solution!

I have upgraded to 10.13.6 (took a full backup first) and the eGPU is working lovely now.

I installed the 4.3b5 DisplayLink driver and I can now use the internal screen plus 1 over Airplay (seems fine so far, but haven't used it much yet).

My USB->HDMI adapter only works in clone mode with MacOS - probably explains why it was in the bottom of my laptop bag, but I have a USB-C to Mini Display Port adapter I've been using for ages and that works fine. It gives me two external screens and the internal screen. All in extended mode.

It's a bit like dongle heaven with all these cables sticking out but at least it works and means I can continue to use the D3100 dock for now. It's not the triple screen setup that I always used to use but thats been so troublesome over the years I had pretty much resolved to go down to two external screens anyway.

I just need to go and make sure that the DisplayLink driver doesn't interfere in any way with Apples eGPU setup.



Forgot to add the adapter link:
https://www.amazon.co.uk/Benfei-Disp.../dp/B06W53PXRB

It's not flawless, sometimes I have to connect it a few times before the monitor wakes up but once it's away it works great. I suspect you could just use a USB-C to DP cable instead?

Last edited by Gudd; 07-24-2018 at 07:29 PM. Reason: Added link
Gudd is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.