12-06-2016, 12:42 PM | #21 |
Junior Member
Join Date: Oct 2016
Posts: 20
|
Hi Michal,
I have tested as native desktop and with ssh. Here is the output from 'example' command of the terminal window is at follows: Code:
sudo /bin/example /home/pi/EDIDv1_1440x900 [libevdi] ioctl: drop_master error=-1 Attempting to use device /dev/dri/card1... [libevdi] ioctl: drop_master error=-1 Press Enter or Ctrl+C to quit... Code:
pi@raspberrypi:~ $ xrandr Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 2048 x 2048 HDMI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 359mm x 287mm 1280x1024 60.02*+ 1280x960 60.00 1024x768 60.00 800x600 60.32 640x480 60.00 720x400 70.08 pi@raspberrypi:~ $ xrandr --listproviders Providers: number : 2 Provider 0: id: 0x43 cap: 0x2, Sink Output crtcs: 3 outputs: 1 associated providers: 0 name:modesetting Provider 1: id: 0x270 cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 0 name:modesetting pi@raspberrypi:~ $ xrandr --setprovideroutputsource 1 0 X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 35 () Value in failed request: 0x43 Serial number of failed request: 16 Current serial number in output stream: 17 pi@raspberrypi:~ $ xrandr --auto (without output) Code:
pi@raspberrypi:~ $ sudo /bin/monitorsim /home/pi/EDIDv1_1440x900 [libevdi] ioctl: drop_master error=-1 [libevdi] ioctl: drop_master error=-1 [libevdi] ioctl: drop_master error=-1 No protocol specified QXcbConnection: Could not connect to display :0 Best regards Michael |
|
|