|
|
Thread Tools | Search this Thread | Display Modes |
01-21-2012, 03:38 PM | #1 |
Junior Member
Join Date: Jan 2012
Posts: 2
|
Display worked on first try. Then turned blue. Now: nothing.
Hello everyone!
I am new to this and I hope I am not asking an already over asked question again. I searched the forum for this issue, but I didn't find the exact one. When I first plugged in my HP Graphics adapter to my Macbook Pro and installed the DisplayLink driver, everything worked fine. After some time, though (maybe after the first restart, I'm not sure if I remember correctly) the screen turned blue-ish (as if only the B part of RGB did it's job). After some somewhat frantic uninstalling and re-installing and unplugging and replugging of the device (which had no appear ant effect, the screen stayed blue), the screen finally didn't even bother to get blue anymore and stayed black. My monitor acts like it is receiving a signal, but that signal is entirely black. Has anyone of you encountered something similar? And maybe even found a solution? Many thanks in advance! Per |
01-23-2012, 02:58 PM | #2 |
Senior Member
Join Date: Apr 2011
Posts: 280
|
The logs show an error in reading the EDID of your display. Just to help identify the issue, if possible, could you please try to connect the adapter to a different display? Thanks
|
01-24-2012, 08:03 AM | #3 | |
Mac Team
Join Date: Feb 2009
Posts: 606
|
Quote:
Carlo |
|
01-24-2012, 06:47 PM | #4 |
Junior Member
Join Date: Jan 2012
Posts: 2
|
Hello Christian and Carlo,
many thanks for your replies. removing and reconnecting the adapter, connector and cable really did the trick. Now everything works fine! Thank you for your support! |
|
|