08-13-2012, 07:23 PM | #11 |
Junior Member
Join Date: Aug 2012
Posts: 3
|
Ok I updated it, and so far so good.
|
08-31-2012, 01:46 PM | #12 |
Junior Member
Join Date: Aug 2012
Posts: 2
|
Same problem
I have the same problem -- 3 monitors, one connected directly to a dock, the other two with UGA-125's, and only one of the UGA's will connect. I tried a complete uninstall, then reinstall with 6.3M1, but all three monitors were now black.
I have another laptop, the same model, in which I have 6.2M0 installed, and the three monitors work normally. So I again uninstalled on the problem laptop and installed 6.3M0. Same results: only 2 of the three monitors work. I've attached the log files for the problem laptop, and also (for comparison) the files from the laptop where everything works fine. |
09-03-2012, 11:08 AM | #13 | |
Senior Member
Join Date: Feb 2009
Posts: 1,561
|
Quote:
Try updating the Intel Primary graphics card drivers. They are from 2010 and could cause issues when used with DisplayLink Update to v6.3 M1. Hopefully doing those 2 things should solve the issue. Wim |
|
09-04-2012, 02:06 AM | #14 |
Junior Member
Join Date: Aug 2012
Posts: 2
|
no go ....
As noted in my previous post, M1 did not work.
Also, according to the laptop manufacturer, my display driver is current. Other suggestions?? |
|
|