Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Linux and Open Source

Reply
 
Thread Tools Search this Thread Display Modes
Old 03-02-2016, 01:43 PM   #1
hugof
Junior Member
 
Join Date: Mar 2016
Posts: 3
Default Microphone not working: Ubuntu 14.04.3

Hello,

I have the latest drivers installed in Ubuntu 14.04.3. The hub is currently working with a monitor and Ethernet cable. I have tested the USB ports and they are working correctly too (at this point in time I cannot use the USB keyboard/mouse dongle because of USB 3.0 issue that are referenced in the DisplayLink support pages).

I am also using the audio jack. The output (when set via Ubuntu's Sound Settings) works, but the left/right speakers are flipped.

In addition to this the microphone does not work. I set the audio input to "Analog input" but no sound is registered in the input level (Set and tested in Ubunbtu's Sound Settings).

In order to diagnose the problem I have also tested the following with success:

1. Use the same mic/ear-phones in the same laptop's jack
2. Use the same mic/ear-phones in the same model laptop jack but using Windows
3. Same as 3 but using the DisplaLink hub jack.

I have included the output of the support tool (DLSupportTool) as an attachment.

Any help in solving this is appreciated.

TIA.
Attached Files
File Type: zip gandalfix_2016-03-02T13:10:06.731478.zip (467.5 KB, 1 views)

Last edited by hugof; 03-02-2016 at 01:48 PM.
hugof is offline   Reply With Quote
Old 03-03-2016, 08:30 AM   #2
mlukaszek
Senior Member
 
mlukaszek's Avatar
 
Join Date: Feb 2010
Posts: 386
Default

Hi,

Sounds systems used in Linux distros are quite flexible - so, it is possible swap the audio channels as you like.

Can you try this:
https://superuser.com/questions/5948...nels-in-ubuntu

Not sure about the mic though - so my proposals will be a bit vague.

First, inspect the output of:
Code:
$ cat /proc/asound/cards
I'll assume you have alsa-utils installed: does recording with ALSA utilities - like arecord - work?
ALSA mixer is (alsamixer) also quite good in diagnosing - do you see the input in it, is it not muted, are the recording levels right?

Thanks,
Michal
mlukaszek is offline   Reply With Quote
Old 03-03-2016, 10:01 AM   #3
Szymon
DisplayLink Tech Support
 
Szymon's Avatar
 
Join Date: Feb 2010
Posts: 55
Default

Hi hugof,

Additionally, I've tested very briefly exact Lenovo USB docking station on a Ubuntu machine with a headset and it works.

From our experience we know sometimes 4 position to 2x 3 position 3.5mm jack adapters (picture attached) required in your setup can be faulty.

Regards,
Szymon
Attached Images
File Type: jpg MUYHSMFF.Main.jpg (18.7 KB, 1 views)
Szymon is offline   Reply With Quote
Old 03-04-2016, 11:59 AM   #4
hugof
Junior Member
 
Join Date: Mar 2016
Posts: 3
Default

Quote:
Originally Posted by Szymon View Post
Hi hugof,

Additionally, I've tested very briefly exact Lenovo USB docking station on a Ubuntu machine with a headset and it works.

From our experience we know sometimes 4 position to 2x 3 position 3.5mm jack adapters (picture attached) required in your setup can be faulty.

Regards,
Szymon
As I said, I tested the jack adapter on the laptop's input so this is not an issue.

Thanks for the warning.
hugof is offline   Reply With Quote
Old 03-04-2016, 01:25 PM   #5
hugof
Junior Member
 
Join Date: Mar 2016
Posts: 3
Default

Quote:
Originally Posted by mlukaszek View Post
Hi,

Sounds systems used in Linux distros are quite flexible - so, it is possible swap the audio channels as you like.

Can you try this:
https://superuser.com/questions/5948...nels-in-ubuntu

Not sure about the mic though - so my proposals will be a bit vague.

First, inspect the output of:
Code:
$ cat /proc/asound/cards
I'll assume you have alsa-utils installed: does recording with ALSA utilities - like arecord - work?
ALSA mixer is (alsamixer) also quite good in diagnosing - do you see the input in it, is it not muted, are the recording levels right?

Thanks,
Michal
Michal,

The cat command gives me the following result:

cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0x94320000 irq 131
1 [Dock ]: USB-Audio - ThinkPad Basic USB 3.0 Dock
DisplayLink ThinkPad Basic USB 3.0 Dock at usb-0000:00:14.0-2.3, super speed

I the used alsamixer and made sure that everything is un-muted.
In the alsa mixer I also see S/PDIF, S/PDIF 1 and S/PDIF 2.
I have als set the mic boost to the maximum.

I have tested with Ubuntu's (use both the analogue and digital inputs).
I also tested with:

arecord test.wav

The result is I can hear very faint noise when I strike the mic.
The voice is imperceptibly low. So the input seems to be working.
Its just being picked up correctly. I retested the cable with the laptop's jack.
No problem here.

Can anyone tell me if they were able to use the mic inn Linux?

TIA.
hugof is offline   Reply With Quote
Reply

Tags
audio, fail, input, linux, mic

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:36 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.