Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Linux and Open Source

Reply
 
Thread Tools Search this Thread Display Modes
Old 10-26-2017, 07:02 PM   #1
isset
Junior Member
 
Join Date: Oct 2017
Posts: 4
Default DisplayLink Driver 1.4 causes system crash

Hi,

I am running a fresh Xubuntu 17.10 install and the displaylink driver causes a full system crash:

I tried the workarounds form here, but non of them worked:

http://support.displaylink.com/knowl...ent-x-upgrades

I hope somebody can help me out.

X-Version is:

Version: 1:7.7+19ubuntu3
DL-Device: MB169B+

If you need further information, please let me know

Best Regards,
isset
Attached Files
File Type: zip notnamed_2017-10-26T19:56:59.050254.zip (145.8 KB, 1 views)
isset is offline   Reply With Quote
Old 10-27-2017, 10:03 AM   #2
mlukaszek
Senior Member
 
mlukaszek's Avatar
 
Join Date: Feb 2010
Posts: 386
Default

Hi,

What kind of crash is it? I can't see anything that looks like a crash in the logs you've sent...
Does the situation improve if you connect the monitor through a powered hub?

Cheers,
Michal
mlukaszek is offline   Reply With Quote
Old 10-27-2017, 02:40 PM   #3
isset
Junior Member
 
Join Date: Oct 2017
Posts: 4
Default

Hi,

the monitor works, but when I open the "Configure Display" tool, the mouse gets stuck and starts "blinking". You can also make Xubuntu open it upon a new device being connected, then I even can configure the monitor, but after a couple of seconds the same behaviour occurs.

I can't swtich to a terminal or do anything else (ctrl+alt+fX), hence I have to do a hard reset.

Best Regards
isset
isset is offline   Reply With Quote
Old 11-06-2017, 09:00 AM   #4
isset
Junior Member
 
Join Date: Oct 2017
Posts: 4
Default

Hi,

so I have looked into other logs and I found this:

Quote:
krnl: [ 1184.381551] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
krnl: [ 1184.402265] usb 4-2: New USB device found, idVendor=17e9, idProduct=ff0b
krnl: [ 1184.402272] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
krnl: [ 1184.402276] usb 4-2: Product: ASUSTEK MB169B+
krnl: [ 1184.402279] usb 4-2: Manufacturer: DisplayLink
krnl: [ 1184.402281] usb 4-2: SerialNumber: G7LMTF046531
krnl: [ 1184.445348] evdi: [I] Initialising logging on level 5
krnl: [ 1187.036213] evdi: [D] add_store:239 Increasing device count to 1
krnl: [ 1187.036504] evdi: [D] evdi_crtc_init:351 drm_crtc_init: 0
krnl: [ 1187.036600] evdi: [W] evdi_painter_crtc_state_notify:484 Painter does not exist!
krnl: [ 1187.036607] evdi: [D] evdi_detect:78 Painter is disconnected
krnl: [ 1187.036615] [drm] Cannot find any crtc or sizes - going 1024x768
krnl: [ 1187.038249] evdi evdi.0: fb1: evdidrmfb frame buffer device
krnl: [ 1187.038250] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
krnl: [ 1187.038251] [drm] No driver support for vblank timestamp query.
krnl: [ 1187.038466] [drm] Initialized evdi 1.5.0 20170419 for evdi.0 on minor 1
krnl: [ 1187.038467] [drm] evdi: evdi_stats_init
krnl: [ 1187.218298] evdi: [D] evdi_painter_connect:572 (dev=1) Connected with ffff94b57aca6e00
krnl: [ 1187.218303] evdi: [D] evdi_detect:75 (dev=1) Painter is connected
krnl: [ 1187.218348] evdi: [D] evdi_painter_crtc_state_notify:481 (dev=1) Notifying crtc state: 3
krnl: [ 1187.359654] evdi: [D] evdi_detect:75 (dev=1) Painter is connected
krnl: [ 1187.359663] evdi: [D] evdi_painter_get_edid_copy:215 (dev=1) 00 ff ff
krnl: [ 1187.359910] evdi: [D] evdi_detect:75 (dev=1) Painter is connected
krnl: [ 1187.359925] evdi: [D] evdi_painter_get_edid_copy:215 (dev=1) 00 ff ff
krnl: [ 1187.361057] evdi: [D] evdi_painter_crtc_state_notify:481 (dev=1) Notifying crtc state: 3
krnl: [ 1187.370063] evdi: [D] evdi_painter_crtc_state_notify:481 (dev=1) Notifying crtc state: 3
krnl: [ 1187.603083] evdi: [D] evdi_painter_mode_changed_notify:505 (dev=1) Notifying mode changed: 1920x1080@60; bpp 32;
krnl: [ 1187.603086] evdi: [D] evdi_painter_mode_changed_notify:506 pixel format 875713112
krnl: [ 1187.603094] evdi: [D] evdi_painter_crtc_state_notify:481 (dev=1) Notifying crtc state: 0
krnl: [ 1188.019151] evdi: [D] evdi_detect:75 (dev=1) Painter is connected
krnl: [ 1188.019155] evdi: [D] evdi_painter_get_edid_copy:215 (dev=1) 00 ff ff
krnl: [ 1188.062704] evdi: [D] evdi_detect:75 (dev=1) Painter is connected
krnl: [ 1188.062709] evdi: [D] evdi_painter_get_edid_copy:215 (dev=1) 00 ff ff
krnl: [ 1189.667351] evdi: [D] evdi_painter_crtc_state_notify:481 (dev=1) Notifying crtc state: 3
krnl: [ 1189.669898] evdi: [D] evdi_painter_mode_changed_notify:505 (dev=1) Notifying mode changed: 1920x1080@60; bpp 32;
krnl: [ 1189.669900] evdi: [D] evdi_painter_mode_changed_notify:506 pixel format 875713112
krnl: [ 1189.669911] evdi: [D] evdi_painter_crtc_state_notify:481 (dev=1) Notifying crtc state: 0
krnl: [ 1189.669914] evdi: [D] evdi_painter_dpms_notify:468 (dev=1) Notifying dpms mode: 0
Quote:
[ 1187.072] (II) modeset(0): EDID vendor "CMN", prod id 4931
[ 1187.073] (II) modeset(0): Printing DDC gathered Modelines:
[ 1187.073] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 1187.073] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 1187.155] (II) config/udev: removing GPU device /sys/devices/platform/evdi.0/drm/card1 /dev/dri/card1
[ 1187.155] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 1187.155] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1187.155] (II) LoadModule: "modesetting"
[ 1187.155] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1187.155] (II) Module modesetting: vendor="X.Org Foundation"
[ 1187.155] compiled for 1.19.5, module version = 1.19.5
[ 1187.155] Module class: X.Org Video Driver
[ 1187.155] ABI class: X.Org Video Driver, version 23.0
[ 1187.155] (II) UnloadModule: "modesetting"
[ 1187.155] (II) Unloading modesetting
[ 1187.155] (II) Failed to load module "modesetting" (already loaded, 0)
[ 1187.155] (II) modeset(G0): using drv /dev/dri/card1
[ 1187.155] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 1187.155] (==) modeset(G0): RGB weight 888
[ 1187.155] (==) modeset(G0): Default visual is TrueColor
[ 1187.155] (II) Loading sub module "glamoregl"
[ 1187.155] (II) LoadModule: "glamoregl"
[ 1187.156] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 1187.156] (II) Module glamoregl: vendor="X.Org Foundation"
[ 1187.156] compiled for 1.19.5, module version = 1.0.0
[ 1187.156] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1187.156] (II) glamor: OpenGL accelerated X.org driver based.
[ 1187.388] (II) glamor: EGL version 1.4 (DRI2):
[ 1187.388] EGL_MESA_drm_image required.
[ 1187.390] (EE) modeset(G0): glamor initialization failed
[ 1187.390] (II) modeset(G0): ShadowFB: preferred NO, enabled NO
[ 1187.390] (II) modeset(G0): Output DVI-I-1-1 has no monitor section
[ 1187.391] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 1187.391] (**) modeset(G0): Display dimensions: (280, 160) mm
[ 1187.391] (**) modeset(G0): DPI set to (92, 121)
[ 1187.391] (II) Loading sub module "fb"
[ 1187.391] (II) LoadModule: "fb"
[ 1187.391] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1187.391] (II) Module fb: vendor="X.Org Foundation"
[ 1187.391] compiled for 1.19.5, module version = 1.0.0
[ 1187.391] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1187.391] (==) modeset(G0): Backing store enabled
[ 1187.391] (==) modeset(G0): Silken mouse enabled
[ 1187.391] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1187.391] (==) modeset(G0): DPMS enabled
[ 1187.396] (II) modeset(G0): Damage tracking initialized
[ 1187.400] xf86: found device 2
[ 1187.402] (II) modeset(0): EDID vendor "CMN", prod id 4931
[ 1187.402] (II) modeset(0): Printing DDC gathered Modelines:
[ 1187.402] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 1187.402] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 1187.497] (II) modeset(0): EDID vendor "CMN", prod id 4931
[ 1187.497] (II) modeset(0): Printing DDC gathered Modelines:
[ 1187.497] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 1187.497] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 1187.633] randr: falling back to unsynchronized pixmap sharing
[ 1187.659] (II) modeset(0): EDID vendor "CMN", prod id 4931
[ 1187.659] (II) modeset(0): Printing DDC gathered Modelines:
[ 1187.659] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 1187.659] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 1187.759] (II) modeset(0): EDID vendor "CMN", prod id 4931
[ 1187.759] (II) modeset(0): Printing DDC gathered Modelines:
[ 1187.759] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 1187.759] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 1187.885] (II) modeset(0): EDID vendor "CMN", prod id 4931
[ 1187.885] (II) modeset(0): Printing DDC gathered Modelines:
[ 1187.885] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 1187.885] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 1187.968] (II) modeset(0): EDID vendor "CMN", prod id 4931
[ 1187.968] (II) modeset(0): Printing DDC gathered Modelines:
[ 1187.968] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 1187.968] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 1188.095] (II) modeset(0): EDID vendor "CMN", prod id 4931
[ 1188.095] (II) modeset(0): Printing DDC gathered Modelines:
[ 1188.095] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 1188.095] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 1189.608] (II) modeset(0): Allocate new frame buffer 3840x1080 stride
[ 1189.736] (II) modeset(0): EDID vendor "CMN", prod id 4931
[ 1189.737] (II) modeset(0): Printing DDC gathered Modelines:
[ 1189.737] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 1189.737] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 1189.839] (II) modeset(0): EDID vendor "CMN", prod id 4931
[ 1189.839] (II) modeset(0): Printing DDC gathered Modelines:
[ 1189.839] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 1189.839] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
And then it ends. I don't see anything unusual here, but maybe it helps.

Best Regards,
isset

Last edited by isset; 11-06-2017 at 09:16 AM.
isset is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.