05-12-2020, 11:32 PM | #1 |
Junior Member
Join Date: May 2020
Posts: 2
|
Color Navigator 7 not working properly
The "Color Navigator 7" Software to calibrate the colors of an EIZO Monitor doesnt work properly with the "StarTech DK30CH2DPPDU USB-C Dockingstation"
Something goes wrong with the profiles. The colors are off and the behaviour is different with the dock than when the monitor is directly connected. Is there maybe a way to fix that with an driver update or is color management not supported by displaylink? macOS Catalina 10.15.4 (19E287) DisplayLink Driver. 5.2.1 Produkt: Startech DK30CH2DPPDU connected via Displayport - Displayport Cable to the dock |
05-13-2020, 10:49 AM | #2 |
DisplayLink Tech Support
Join Date: Apr 2020
Posts: 461
|
Hello,
Thank you for contacting us! I would like to know more about your system, for that would you mind gathering the logfiles that will give us more detail? The following link will take you to the steps you have to take: https://support.displaylink.com/know...to-displaylink Would you be able to take a picture or video to show us exactly how it looks on your side with dock and without the dock connected to the PC? Thank you, Katarzyna
__________________
Katarzyna Czaja DisplayLink Check DisplayLink powered products here. Basic troubleshooting FAQs: |
05-14-2020, 08:33 PM | #3 |
Junior Member
Join Date: May 2020
Posts: 2
|
Answere from DisplayLink support for all who have the same problem with Color Navigator and probably all hardware calibrated monitors at the moment of this post.
Hello, Last edited by Ingo; 05-14-2020 at 08:48 PM. |
01-10-2021, 01:19 PM | #4 |
Junior Member
Join Date: Jan 2021
Posts: 1
|
Hi,
I also have a problem similar to what you describe. When I plug my Eizo screens through a DisplayLink hub, they have a weird behavior. No matter if I connect them via DisplayPort or HDMI. Colors are off. The Color Navigator (calibrating software) cannot save the ICC profiles after calibration. I tested this with 3 Eizo screens. All of them don't work as they are supposed to when connected to the computer via a DL docking station. They are all recent models. 3 different models. 2 of the screens are basically new. Please, Display Link team, make what's necessary to fix this. I invested in two docking stations which were quite expensive (around 300$ each)... Best, Mitko |
|
|