06-22-2022, 04:05 PM | #1 |
Junior Member
Join Date: Jun 2022
Posts: 1
|
MBA M1 Monterey Display detected but no image
I use:
- MacBook Air M1 2020 - MacOS 12.4 - DisplayLink Manager 1.7.0 - Asus MB16AC - USB adapter (so the display is not trying to use DP-Alt mode) The Display is detected by DLM The Display shows up in system report under USB with valid Product-ID The Display is shown in system preferences and can be moved But it seems to have a false aspect ratio. DLM has all permissions under system preferences / data privacy Windows can be moved to the display but it remains black uninstalled and reinstalled DLM used different cables used different usb hubs what else I can do? thanks for help |
06-23-2022, 08:18 AM | #2 |
Junior Member
Join Date: Jun 2022
Posts: 2
|
Hi! Have same problem Literally yesterday everything works.
Macbook air m1 displayLink 17.0.0 Tried to restart macbook, reinstall displayLink, install older version, unplug and plug monitors. Note: monitors detected but not show image Thanks |
06-23-2022, 09:53 PM | #3 |
Junior Member
Join Date: Jun 2022
Posts: 2
|
UPD:
Its finally works, I hope thats will help you too I just unplug all HDMI/DP from docking station and plug it all back (displayPort program has been ON), and its works fine, all 3 monitors show image |
06-27-2022, 08:59 AM | #4 |
Junior Member
Join Date: Jun 2022
Posts: 1
|
Fixed my Monterey 12.4 with DisplayLink Manager 1.7.0
After testing a lot I found a solution that fixed the screens.
1. Restart Mac after upgraded OS to Monterey 12.4 2. Restart Mac after installed Display Link Manager 1.7.0 3. Turn off the power on my Belkin Dual Display USB-C Dock 4. Turn on power on the box. Tada, display works again |
|
|