|
|
Thread Tools | Search this Thread | Display Modes |
|
12-10-2013, 09:18 AM | #1 |
Junior Member
Join Date: Dec 2013
Posts: 2
|
How to disable video portion and only keep Ethernet, USB and Audio?
I have a Targus USB 3.0 docking station ACP71USZ and Asuz laptop with Intel 5000 graphics and mini Display Port video output.
I want to use my hi-res miniDP port to feed hi-res monitor and use Targus only for USB, Audio and Ethernet. I have DisplayLink software v7.5M0 on Windows 8.1 Every time I connect to the docking station it deactivates the signal to my external monitor via miniDP output and I forced to use lower-res Targus video output. Disabling Targus USB Monitor and DisplayLink USB Monitor devices in Windows Device Manager will not help. Once I stop DisplayLink Windows service, the signal to the monitor immediately activates, but Ethernet, Audio and USB ports on Targus become inactive. How can I use my laptop's video output together with the Targus docking station? Can I disable video functionality of Display Link and just keep the rest? |
12-11-2013, 10:43 AM | #2 |
Senior Member
Join Date: Feb 2009
Posts: 1,561
|
You should be able to disable the video device under "USB Display Adapters" in device manager. This disables the USB driver for the video part.
Wim |
12-11-2013, 11:42 PM | #3 |
Junior Member
Join Date: Dec 2013
Posts: 2
|
I tried to disable USB Display Adapter in the Device Manager. It has no effect. The moment docking station is plugged in, the Video output from internal HDMI/DP is deactivated.
If I stop DisplayLink service and connect the docking station, the video output from internal HDMI/DP works normally, but USB/Ethernet ports on the docking station do not work. |
|
|