5.2RC on Lenovo T500 with ATI/Intel

lsmi4126 · 10-05-2009, 12:42 AM

The display connected to the DisplayLink (on a Kensington 33367) detects a signal however will not display the desktop, in either mirror or extend, or in any resolution. It will re-adjust when settings are changed, but will not display the desktop at all.

Log attached.

Cheers,

Lucas

lsmi4126 · 10-12-2009, 04:50 PM

Okay - so if I boot up with the BIOS video set to Integrated or Discrete only the display link works. If i boot up in Switchable mode it doesn't work - it will just remain blank, but on. Windows thinks the screen is active, however nothing displays.

Martin · 10-17-2009, 04:51 PM

Hi,

Unfortunately we will not properly support switchable graphics in the 5.2 release. There are plans to improve support in the 5.3 release due next year.

Best regards,
Martin
DisplayLink

10-12-2009, 04:50 PM	#2
lsmi4126 Junior Member Join Date: Oct 2009 Posts: 2	Okay - so if I boot up with the BIOS video set to Integrated or Discrete only the display link works. If i boot up in Switchable mode it doesn't work - it will just remain blank, but on. Windows thinks the screen is active, however nothing displays. Last edited by lsmi4126; 10-12-2009 at 05:12 PM.

10-17-2009, 04:51 PM	#3
Martin Member Join Date: Sep 2009 Posts: 75	Hi, Unfortunately we will not properly support switchable graphics in the 5.2 release. There are plans to improve support in the 5.3 release due next year. Best regards, Martin DisplayLink