03-21-2013, 03:45 PM | #1 |
Member
Join Date: Apr 2010
Posts: 32
|
Has upgrading to OS X 10.8.3 fixed everyone's issues?
Subject pretty much says it all. My Mimo USB display has been sitting in the closet for a long time....will the 1.8 Displaylink drivers play nice with OS X 10.8.3? Looks like the beta 2.0 drivers are giving some people big problems - so I'm not ready to try them yet.
|
03-22-2013, 04:33 PM | #2 |
Senior Member
Join Date: Feb 2009
Posts: 1,561
|
The beta 1 seemed to be good for most users as it had 1500 downloads and there was only one issue posted on the beta in the forum. And that did not look like it was directly connected to the beta.
V2.0 is just released, so I would recommend giving it a go... Wim |
03-25-2013, 05:40 AM | #3 |
Junior Member
Join Date: Feb 2013
Posts: 1
|
I'm still having issues with audio and ethernet (!) on usb 3.0 using V2.0 and 10.8.3
|
03-26-2013, 09:22 PM | #4 | |
Junior Member
Join Date: Mar 2013
Posts: 1
|
Quote:
I have 10.8.3 and V2.0 and after awakening from sleep mode OSX freezes sometimes .... actually more often than before ... 4th time now since installing 10.8.3 when it was released. When the freeze happens the screen on the display connected to the display port is completely light blue while the display connected to the displaylink usb3.0 device shows a grey/white distorted square in the lower right part of the screen. I'm using a current Macbook Air and a Digitus usb3.0 video card. |
|
03-27-2013, 12:30 AM | #5 | |
Junior Member
Join Date: Oct 2012
Posts: 16
|
Quote:
Eugene- The audio issue may be due to audio only being supported over USB 2.0. Please let me know if logs are helpful: I'll collect and submit one from the other working connection and one from the problematic connection the next time this happens. |
|
03-27-2013, 07:13 AM | #6 |
Junior Member
Join Date: Jul 2011
Posts: 14
|
I have the offset issue again in Firefox using 2.0 and 10.8.3.
|
03-27-2013, 06:38 PM | #7 |
Junior Member
Join Date: Jun 2011
Location: San Antonio, TX
Posts: 7
|
Strange issue
I have 10.8.3 and 1.8 loaded and while java tends to crash on multiple displays, everything else worked including being able to use 1920x1080 for all three displays (Viewsonic VX2439wm), attached to Newer Technology USB 2.0 HDMI to USB adaptors. With 2.0 which I installed this morning, I no longer have 1920x1080 option and using Best for Display in the System Settings -> Display window defaults to 1080p which causes the dock and menu bar to disappear off the screen. So I uninstalled and reinstalled 1.8 since it was working before and now only 1 out of the 3 external monitors are even recognized. I've unplugged, uninstalled/reinstalled and got the same results. Fixed permissions and Repair disk just in case and still same result. This is sad and very . Anyone have any thoughts????
Update: I installed 1.8 as mentioned earlier then instead of Uninstalling it and installing 2.0, i just did an install on top of 1.8. Now all my monitors come back to life and dock and menu bar appear properly, but v2.0 doesn't seem to detect any resolution higher than 1680x1050 so the resolution isn't great and would prefer to utilize my max resolution for these monitors which is 1920x1080. I've attached an updated DisplayLink Information.zip file. Last edited by mifiguer; 03-28-2013 at 03:34 PM. Reason: update |
03-27-2013, 10:11 PM | #8 |
Junior Member
Join Date: May 2010
Posts: 10
|
My machine also does not wake from sleep properly with the 2.0 driver and 10.8.3
|
04-01-2013, 02:46 PM | #9 |
Junior Member
Join Date: Apr 2013
Posts: 1
|
v2.0 on 10.8.3
Haven't had the occasional crashes (can't reproduce but seems to happen when a lot is happening on Safari on a DisplayLink screen) yet although I've only been running v2.0 for a few mins on 10.8.3.
This was a real pain (but the benefit of DisplayLink exceeded the pain so coped with it). The other niggle I had was the flickering when going to iCloud.com with Safari on a DisplayLink screen. This is still there unfortunately. |
04-04-2013, 05:02 AM | #10 |
Junior Member
Join Date: Aug 2012
Posts: 7
|
Still getting the annoying screen saver issue. It randomly kicks in, even if I don't have my DL3500 device attached. This is with v2.0 GA and 10.8.3. Isn't this supposed to have been fixed? Is there some other way to fix this?
|
|
|