1680x1050 on HP USB 2.0 docking station and Samsung 2343bw

kzvonicek · 01-08-2011, 11:02 AM

Hi,

Iam not able to turn my new HP USB 2.0 docking station to display higher resolution than 1280x1024 on a Samsung Syncmanster 2343BW. I understand that the native resolution (2048x1152) its not supported by the DisplayLink chip, but i would expect, that it could run on 1680x1050 witch is supported by both devices.

DisplayLink Support Files can be found in the attachement.

Thanks in advance for any help.

Pawel · 01-11-2011, 11:45 AM

Here is the list of the modes supported by your monitor:

Display Modes
=============
640x480x24@60
800x600x24@56
800x600x24@60
1024x768x24@60
1280x960x24@60
1280x1024x24@60
2048x1152x24@60

It runs on 1280x1024 as this is the highest resolution supported by both docking station and the monitor.

Regards

kzvonicek · 01-14-2011, 06:49 PM

Thanks Pawel,

it seems you are right, strange is that in the manual I downloaded from Samsung support page is the list of modes much longer. But when I connected the monitor to other graphics card 1680x1050 was not supported either.

Bad luck.

01-11-2011, 11:45 AM	#2
Pawel Moderator Join Date: Aug 2010 Posts: 214	Here is the list of the modes supported by your monitor: Display Modes ============= 640x480x24@60 800x600x24@56 800x600x24@60 1024x768x24@60 1280x960x24@60 1280x1024x24@60 2048x1152x24@60 It runs on 1280x1024 as this is the highest resolution supported by both docking station and the monitor. Regards

01-14-2011, 06:49 PM	#3
kzvonicek Junior Member Join Date: Jan 2011 Posts: 2	Thanks Pawel, it seems you are right, strange is that in the manual I downloaded from Samsung support page is the list of modes much longer. But when I connected the monitor to other graphics card 1680x1050 was not supported either. Bad luck.