|
11-05-2015, 11:26 AM
|
#1 |
|
Junior Member
Join Date: Nov 2015
Posts: 1
|
Problem Win10 + Dell MKS14 Dock - going on and off
Hello,
my DisplayLink is repeatedly disconnecting and reconnecting, and sometimes freezing. In the morning it does not work at all  , I have to turn it on and off several times, until it starts to work.... and then it starts to connect and disconnect  .I've tried all these steps already: http://support.displaylink.com/knowl...from-repeatedl Could you guys help me out? Thanks in advance. 
|
|
|
|
11-05-2015, 12:20 PM
|
#2 |
|
Member
Join Date: Feb 2015
Posts: 51
|
Thank you for contacting us. Your logs shows a lot of USB errors, which usually points to hardware problem with the device (USB hub to be precise).
Please contact Dell directly or the shop you have bought the device. BR, Kuba |
|
|
|
|
12-07-2015, 09:05 PM
|
#3 |
|
Junior Member
Join Date: Dec 2015
Posts: 3
|
Same Problem MKS14: repeatedly disconnecting and reconnecting
I'm experiencing the same problem as as Louis Carlos.
My hardware configuration is: DELL Latitude E7440 with Windows 10 Dell MKS14 Dock Dell U2515H The version of DisplayLink Core Software is 7.9.630.0 The version of DisplayLink Graphics is 7.9.658.0 Best regards. Fabio Filippi. |
|
|
|
|
12-07-2015, 09:38 PM
|
#4 |
|
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi
As a first step please run through this FAQ: http://support.displaylink.com/knowl...from-repeatedl If that doesn't help please attach the output from this tool: http://support.displaylink.com/knowl...from-repeatedl Thanks, James |
|
|
|
|
12-08-2015, 10:47 PM
|
#5 |
|
Junior Member
Join Date: Dec 2015
Posts: 3
|
Log
Hi James,
I've tried all these steps: http://support.displaylink.com/knowl...from-repeatedl I post as attachment the output of DisplayLink Support Tool 1.0.0.25. Thank you. Best regards. Fabio. |
|
|
|
|
12-10-2015, 04:24 AM
|
#6 |
|
Junior Member
Join Date: Dec 2015
Posts: 1
|
Same issue here, Easy to blame hardware...
I was also sent down the rabbit hole of 'usb errors, must be a hardware issue' with DisplayLink support techs. Don't waste your time. I guess they find it easier than actually solving their win10/usb3 problems. This is being reported more and more and they keep saying the same thing, 'Your hardware is bad', or 'Try a new cable'. Laughable and Lazy.
In my case, the adapter works without freezing/disconnecting when I use the usb2 ports so I'm stuck with that until they actually own up to their win10/usb3 problems. Hey DisplayLink, Get your act together. |
|
|
|
|
12-13-2015, 03:31 PM
|
#7 |
|
Junior Member
Join Date: Dec 2015
Posts: 3
|
Usb 2.0
On my Notebook I don't have USB 2.0 port.
So I'm using and old USB 2.0 cable. In the last 60 minute with this cable the problem seem to be resolved. How delamitry told, the problem seems to be due win10 + usb3. |
|
|
|
 |
| Tags |
| disconnecting, reconnecting |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
